|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-11-2013, 04:21 PM | #21 |
Senior Member
Join Date: May 2010
Location: pittsfield, MA
Posts: 2,086
|
Re: Fan blade hitting distriblutor bale wire
51 merc-ct has it. See if the pulleys line up. They must be off. Should be 1/2" clearance between the fan blade and the clip. If not, remove the fan assembly, loosen the 2 bolts holding the shaft and move out. Difficult to do with the assembly in the car. Let us know. Don't bend the blades like some have suggested. Bum "patch"
John |
|
|
Sponsored Links (Register now to hide all advertisements) |
|