Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 02-05-2021, 08:47 AM   #1
77Birdman
Senior Member
 
Join Date: Nov 2018
Location: North Eastern MD
Posts: 486
Default Was Plywood Used

There are a few threads that pop up regarding wood questions. Purely out of curiosity, was plywood used in any parts of the original construction of any of the 'A's?
77Birdman is offline   Reply With Quote
Old 02-05-2021, 09:07 AM   #2
Ed in Maine
Senior Member
 
Join Date: May 2010
Location: Washington Cty., ME or Flagler Cty., FL
Posts: 1,106
Default Re: Was Plywood Used

Plywood could have been used, it was invented 3500BC by the Greeks and patented in 1865 by a guy named John Mayo. I have an early set of floor boards that are made out of planks. There is a story that Ford used old shipping crates but I doubt that. Shipping crate wood is warped and cracked and was most likely used as fuel. Ed
Ed in Maine is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 02-05-2021, 09:16 AM   #3
Bob Bidonde
Senior Member
 
Bob Bidonde's Avatar
 
Join Date: May 2010
Location: Long Island, NY
Posts: 3,432
Default Re: Was Plywood Used

Plywood is original stock for front floors in 1930 & 1931 cars.
__________________
Bob Bidonde
Bob Bidonde is offline   Reply With Quote
Old 02-05-2021, 09:24 AM   #4
Jack Shaft
BANNED
 
Join Date: Dec 2019
Posts: 1,196
Default Re: Was Plywood Used

Jan'29 Sport Coupe,Michigan hardwood floorboards
Jack Shaft is offline   Reply With Quote
Old 02-05-2021, 10:05 AM   #5
ronn
Senior Member
 
Join Date: Feb 2011
Location: NNNNNNNNJJJJJJJJJJ
Posts: 6,758
Default Re: Was Plywood Used

have never seen "original" plywood floors in any A.


only planks
ronn is offline   Reply With Quote
Old 02-05-2021, 10:10 AM   #6
Chuck Dempsey
Senior Member
 
Chuck Dempsey's Avatar
 
Join Date: May 2010
Location: Waynesville, NC
Posts: 778
Default Re: Was Plywood Used

Sponsored Links (Register now to hide all advertisements)
I think my late '29 Tudor has a rear plywood floorboard. It certainly looks old enough to be original, and had anti-sqeak lining tacked around the edges.
Chuck Dempsey is offline   Reply With Quote
Old 02-05-2021, 10:19 AM   #7
jrelliott
Senior Member
 
jrelliott's Avatar
 
Join Date: May 2010
Location: Pine, AZ
Posts: 792
Default Re: Was Plywood Used

Found some in the front seat frames that was on the sides of the seats that attached to the door frame. Mine were dry rotted at the bottom and had to make new ones. Used Baltic birch plywood and sealed with poly urethane.
jrelliott is offline   Reply With Quote
Old 02-05-2021, 10:24 AM   #8
Bob Bidonde
Senior Member
 
Bob Bidonde's Avatar
 
Join Date: May 2010
Location: Long Island, NY
Posts: 3,432
Default Re: Was Plywood Used

One of the front floor panels in my 1931 45B Coupe is original plywood. I am not sure of this, but I read somewhere that the original floor boards through about mid-1929 were made of tongue & groove boards from shipping cartons. In mid-1929 through 1931, the original floor board material was plywood.
__________________
Bob Bidonde
Bob Bidonde is offline   Reply With Quote
Old 02-05-2021, 11:04 AM   #9
vern hodgson
Senior Member
 
Join Date: Dec 2014
Location: langley, wa.
Posts: 642
Default Re: Was Plywood Used

I believe I have an original plywood floorboard, will post photo later today, stay tuned.
vern hodgson is offline   Reply With Quote
Old 02-05-2021, 11:40 AM   #10
700rpm
Senior Member
 
700rpm's Avatar
 
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,892
Default Re: Was Plywood Used

The floorboards in my ‘29 Tudor are plywood. I’m the second owner, it was unrestored when I bought it, and have owned the car since 1961, so I’m pretty sure they’re original.
Weren’t the panels on woodies plywood?
__________________
Ray Horton, Portland, OR


As you go through life, keep your eye on the donut, not the hole.
700rpm is offline   Reply With Quote
Old 02-05-2021, 12:23 PM   #11
JayJay
Senior Member
 
Join Date: Jan 2020
Location: SF Bay Area
Posts: 1,044
Default Re: Was Plywood Used

At least the lower floorboard on my 30 Town Sedan, which I believe to be original, is plywood.

JayJay
Attached Images
File Type: jpg IMG_2674.jpg (86.8 KB, 117 views)
__________________
JayJay
San Francisco Bay Area

------------------------
1930 Murray Town Sedan
1931 Briggs S/W Town Sedan
JayJay is offline   Reply With Quote
Old 02-05-2021, 02:43 PM   #12
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,486
Default Re: Was Plywood Used

The 150A/B & 225 also used plywood in the body.
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote
Old 02-05-2021, 03:33 PM   #13
vern hodgson
Senior Member
 
Join Date: Dec 2014
Location: langley, wa.
Posts: 642
Default Re: Was Plywood Used

This is an original
Attached Images
File Type: jpg 8F744900-3D9C-42C8-BDA2-6807CD3590AA.jpg (46.4 KB, 137 views)
File Type: jpg 1A5B6B41-0239-4600-87A7-992958DCDF6A.jpg (44.5 KB, 118 views)
vern hodgson is offline   Reply With Quote
Old 02-05-2021, 08:44 PM   #14
eagle
Senior Member
 
eagle's Avatar
 
Join Date: Aug 2011
Location: Eagle Bend, MN
Posts: 2,025
Default Re: Was Plywood Used

I know this is somewhat out of context because it was a third party body, but I had a standrive milk truck that had plywood in some of the body construction. The plys were quite thick and as some of the glue had deteriorated so you could see it well.
__________________
"There are some that can destroy an anvil with a teaspoon and shouldn't be allowed to touch anything resembling a tool."
eagle is offline   Reply With Quote
Old 02-06-2021, 11:08 AM   #15
Roger V
Senior Member
 
Roger V's Avatar
 
Join Date: May 2010
Location: Michigan
Posts: 1,593
Default Re: Was Plywood Used

Go the the Model A Judging Standards and Restoration Guidelines Area 11 page 5. Revised 2016. "In March 1929, plywood floorboards began to appear."
Roger V is offline   Reply With Quote
Old 02-08-2021, 07:51 AM   #16
77Birdman
Senior Member
 
Join Date: Nov 2018
Location: North Eastern MD
Posts: 486
Default Re: Was Plywood Used

Good info, wasnt sure there would be any response. Somewhat related I had a 1913 English made motorcycle, the floor boards in the sidecar were plywood. Common sense and logic would have made me think it was used.
77Birdman is offline   Reply With Quote
Old 02-08-2021, 08:19 AM   #17
Jim M
Senior Member
 
Jim M's Avatar
 
Join Date: Nov 2010
Location: Sebastian, FL
Posts: 479
Default Re: Was Plywood Used

I had a plywood floor in my 29 Roadster that looked VERY original. Used it for a template to replace it with birch.
Jim M is offline   Reply With Quote
Old 02-08-2021, 12:35 PM   #18
Oldford59
Member
 
Join Date: Jan 2021
Posts: 47
Default Re: Was Plywood Used

Hi,
I heard that Henry Ford would save and re-use wooden crate materials for fabrication of the wooden floors back in the day.
I saw it on a car show and a old school model a owner was talking about that.
Oldford59 is offline   Reply With Quote
Old 02-08-2021, 02:14 PM   #19
77Birdman
Senior Member
 
Join Date: Nov 2018
Location: North Eastern MD
Posts: 486
Default Re: Was Plywood Used

Quote:
Originally Posted by Oldford59 View Post
Hi,
I heard that Henry Ford would save and re-use wooden crate materials for fabrication of the wooden floors back in the day.
I saw it on a car show and a old school model a owner was talking about that.
I have heard this many times. I know ZERO about car production, but I do know a little about wood. I would think it would be easier (thus cheaper) to have wood to be used in the production of the vehicles a known commodity and prepped accordingly. Breaking apart pallets/shipping crates, pulling nails (I doubt they used screws), then sorting into useful sized piles seems counter intuitive to me. I would think compared to the amount of wood used in the production line, 'scrap' lumber from crates would amount to very little.
77Birdman is offline   Reply With Quote
Old 02-08-2021, 02:22 PM   #20
JayJay
Senior Member
 
Join Date: Jan 2020
Location: SF Bay Area
Posts: 1,044
Default Re: Was Plywood Used

Quote:
Originally Posted by 77Birdman View Post
I have heard this many times. I know ZERO about car production, but I do know a little about wood. I would think it would be easier (thus cheaper) to have wood to be used in the production of the vehicles a known commodity and prepped accordingly. Breaking apart pallets/shipping crates, pulling nails (I doubt they used screws), then sorting into useful sized piles seems counter intuitive to me. I would think compared to the amount of wood used in the production line, 'scrap' lumber from crates would amount to very little.
All true, and today this would make little sense. Especially since nowadays we would just order up several hundred Conex containers of premade floorboards and have them shipped from overseas. However, consider the times when raw material cost likely made up a much higher percentage of the car's value, labor was not as comparatively expensive then as it is now. I'm sure this could be quantified but doggone if I have any numbers to do so.

JayJay
__________________
JayJay
San Francisco Bay Area

------------------------
1930 Murray Town Sedan
1931 Briggs S/W Town Sedan
JayJay is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:31 PM.