The Ford Barn

jw hash · 11-13-2011, 09:04 AM

On the A400 and the 68C there is three rubber stem bumper on the top under the header pan ,there use to be a guy out there that made them but he does not make them anymore, I found a place that will make them for me but them have a minimum order is there anyone out there is willing to pay $5 delivered for all three,

Joop · 11-13-2011, 09:20 AM

I am if they are the same as original

Kevin in NJ · 11-13-2011, 10:05 AM

I need a set.

Jason in TX · 11-13-2011, 10:31 AM

I'm not following you. Picture? I may need some.

Bill Edstrom · 11-13-2011, 10:35 AM

I will take 3 or 4 sets. Bill edstrom

mot · 11-13-2011, 10:58 AM

Sponsored Links (Register now to hide all advertisements)

Ill take at least 3 sets
tom

Joop · 11-13-2011, 11:07 AM

Jason in TX

You need some

400A-64 · 11-13-2011, 11:19 AM

ME TOO !!
Bruce Davis [email protected]

Midwest Tin · 11-13-2011, 12:04 PM

Hi, I will take three sets also. Jim Sinclair ( [email protected] )

Skipper Mc/Louisiana · 11-13-2011, 12:11 PM

I wish to have two sets. Thanks.
Skipper McAdams

Jason in TX · 11-13-2011, 01:09 PM

Ok. I need some... Now I need to know what the heck they are and where they go!

What are "rubber stem bumpers??"

I cannot think where the go on that metal top header with the thumb screws.

Joop · 11-13-2011, 01:25 PM

Look under your top (wood) header there is the metal header piece (strip) and it has 3 holes in it.
2 on each side and one in the middle, that is where there going
They keep the top header from rubbing the top of the windshield header

Jason in TX · 11-13-2011, 01:33 PM

Oh!! Haha. You mean those three empty holes?? Haha

YUP! I need some!

Joop · 11-13-2011, 01:41 PM

I told you so!

LukeDahlinger · 11-13-2011, 01:49 PM

Put me down for 2 sets.

John Stone · 11-13-2011, 03:26 PM

I'll take a couple sets.

ajanke · 11-13-2011, 03:44 PM

I would like a couple of sets.

Roger V · 11-13-2011, 03:50 PM

I'll take a set.

SteveB31 · 11-13-2011, 08:40 PM

I will take 20 sets, so we have some in the future for other restorers. Had three people ask me for those just this week.

Steve Becker
Bert's Model A Center
800-321-1931

BadgerA · 11-13-2011, 09:08 PM

About to start on a 68C myself. I will take three sets.

jw hash · 11-14-2011, 08:00 AM

Thanks for the responce Guy`s, I`m ordering them today they told me it would be 4 to 6 weeks lead time.I will let you know they come in. John

Joop · 11-14-2011, 08:44 AM

Hi John

Do you want us to start sending money now.

Jim in S.C. · 11-14-2011, 09:10 AM

OK, OK, I guess I need a couple of sets!
[email protected]

Glenn of northport · 11-14-2011, 09:45 AM

I will take a set

lfg · 11-14-2011, 04:09 PM

I could use 2 sets.

Larry Gilbert

dshebuski · 11-14-2011, 08:25 PM

Sponsored Links (Register now to hide all advertisements)

I will take two sets of the bumpers.
Don Shebuski

oldoily · 11-14-2011, 09:39 PM

I will take two sets. Thanks

Roger Ball · 11-15-2011, 05:41 AM

I'll take two sets for my 68C project - starting soon.

A400 Guy · 11-15-2011, 07:51 AM

I'll take a set as well. Tim O'Brien [email protected]

jw hash · 11-15-2011, 08:36 AM

Guy`s do not send any money until after I receive the bumpers, I just want to have them in my hands and make sure they are correct first, thanks John

Bill Underwood · 11-15-2011, 02:29 PM

PM sent, count me in.

Bill U

B400 · 11-18-2011, 10:03 AM

I would like three sets please. Do you have a expected delivery time?

Can anyone help me locate the two rubber bumpers midway down the top rail and also the rubber strips located within the metal channel that rests against the quarter window rail. Any leads would be helpful. Thanks Mike 719-671-8006

mot · 11-18-2011, 12:33 PM

hey guys
I notice there are several people here working on the 68C
i keep the records for that body style and dont have your name
please get ahold of me so i can record the data on this rare body style and maybe we can get together and get all the parts needed
this also goes for the 400A guys,Joop is on here too
thanks for the help
sorry John I dont mean to cut into your thread but i think we can get some of these parts availible for the guys that need them
tom moniz
68C record keeper
[email protected]

asapguy · 11-18-2011, 03:59 PM

John, I will take a set. Perry

31Cabriolet68-C · 06-28-2018, 09:49 AM

Any more bumpers available? I'm a new member of the Barn, and I'm looking at old posts... Thanks, John Baldwin

Bob Bidonde · 06-28-2018, 09:57 AM

BadgerA,
I like the color of your 190A. Please send me some pictures of it.

[email protected]

Dick Carne · 06-29-2018, 12:20 PM

I'm in the process of gathering parts/pieces for my 68C. Please add me to your list if you would, as I will need to replace these when I get to that point. Thanks in advance for your kind assistance.

larrys40 · 06-29-2018, 06:34 PM

John
Put me down for 4 sets. I heard the 36 cabriolet were same or very close but haven’t checked them out.

Thanks for your work in this.
Larry shepard

Midwest Tin · 06-29-2018, 09:23 PM

Hi John, I’m interested in three sets. Let me know. Thank you for your efforts on this.

Jim Sinclair

redmodelt · 06-29-2018, 11:44 PM

Guys look at the date of the original postings they are Nov of 2011. You might send the original poster a PM or contact Berts, if you read the whole thing looks like Berts asked about extra sets. Also I do not see any follow up that they were even made.

jw hash · 07-07-2018, 09:14 PM

I still have A LOT of them 7/7/18 John

whidbeyA · 07-09-2018, 09:49 AM

I'll take a couple sets.

Keith Cavender

jw hash · 07-09-2018, 06:06 PM

guy`s I went back and looked at my original post. it will not let me edit it. I have had to rise the price since then for the shipping cost. I will honor that price for the ones that have ordered up until 7/9/18 there after it will be $12 for the first set of three, any orders over one set will be $5 per set. Keith I will have a couple sets for you here.

Oldbluoval · 07-10-2018, 05:07 AM

Yep
I sent some stuff out by post office yesterday that always cost $1.95
Yesterday was $3.50
Exact same, questioned clerk and she double checked

Maclab58 · 07-11-2018, 04:13 PM

I will take 3 sets

Marshall V. Daut · 07-11-2018, 05:44 PM

Sponsored Links (Register now to hide all advertisements)

I'll take one set, please.
Marshall

jw hash · 07-11-2018, 07:17 PM

I sent out my last set at the original price of $5 today it cost me $6 to send them. so if anyone wants some now it is $12 for the first set and $5 for any additional sets.

Bruce Adams · 07-12-2018, 09:36 AM

I'll take a set, thank you

asapguy · 07-12-2018, 10:03 AM

John last fall I replaced mine. We have a local hardware store that is very well equipped with fasteners etc. They fit & seem to work well but I will take a set just to have them on hand & compare with what I have.

11-13-2011, 09:04 AM	#1
jw hash Senior Member Join Date: May 2010 Location: Auburn Washington Posts: 2,552	A400 68C rubber stem bumpers On the A400 and the 68C there is three rubber stem bumper on the top under the header pan ,there use to be a guy out there that made them but he does not make them anymore, I found a place that will make them for me but them have a minimum order is there anyone out there is willing to pay $5 delivered for all three,

11-13-2011, 09:20 AM	#2
Joop Senior Member Join Date: May 2010 Location: Glendale, AZ Posts: 2,952	Re: A400 68C rubber stem bumpers I am if they are the same as original

11-13-2011, 10:05 AM	#3
Kevin in NJ Senior Member Join Date: May 2010 Location: South East NJ Posts: 3,398	Re: A400 68C rubber stem bumpers I need a set.

11-13-2011, 10:31 AM	#4
Jason in TX Senior Member Join Date: May 2010 Location: ⓉⒺXⒶⓈ Posts: 2,047	Re: A400 68C rubber stem bumpers I'm not following you. Picture? I may need some. __________________ -------------- Drive it like you know how to fix it! DMAFC / OILERS CC-MC

11-13-2011, 10:35 AM	#5
Bill Edstrom Member Join Date: May 2010 Posts: 36	Re: A400 68C rubber stem bumpers I will take 3 or 4 sets. Bill edstrom

11-13-2011, 10:58 AM	#6
mot Registered User Join Date: May 2010 Location: Sacramento Ca Posts: 1,179	Re: A400 68C rubber stem bumpers Sponsored Links (Register now to hide all advertisements) Ill take at least 3 sets tom

11-13-2011, 11:07 AM	#7
Joop Senior Member Join Date: May 2010 Location: Glendale, AZ Posts: 2,952	Re: A400 68C rubber stem bumpers Jason in TX You need some

11-13-2011, 11:19 AM	#8
400A-64 Senior Member Join Date: Aug 2010 Location: Grass Valley,CA Posts: 295	Re: A400 68C rubber stem bumpers ME TOO !! Bruce Davis [email protected]

11-13-2011, 12:04 PM	#9
Midwest Tin Senior Member Join Date: May 2010 Location: Kenosha, WI Posts: 1,001	Re: A400 68C rubber stem bumpers Hi, I will take three sets also. Jim Sinclair ( [email protected] )

11-13-2011, 12:11 PM	#10
Skipper Mc/Louisiana Member Join Date: May 2010 Location: Baton Rouge, LA Posts: 65	Re: A400 68C rubber stem bumpers I wish to have two sets. Thanks. Skipper McAdams

11-13-2011, 01:09 PM	#11
Jason in TX Senior Member Join Date: May 2010 Location: ⓉⒺXⒶⓈ Posts: 2,047	Re: A400 68C rubber stem bumpers Ok. I need some... Now I need to know what the heck they are and where they go! What are "rubber stem bumpers??" I cannot think where the go on that metal top header with the thumb screws. __________________ -------------- Drive it like you know how to fix it! DMAFC / OILERS CC-MC

11-13-2011, 01:25 PM	#12
Joop Senior Member Join Date: May 2010 Location: Glendale, AZ Posts: 2,952	Re: A400 68C rubber stem bumpers Look under your top (wood) header there is the metal header piece (strip) and it has 3 holes in it. 2 on each side and one in the middle, that is where there going They keep the top header from rubbing the top of the windshield header

11-13-2011, 01:33 PM	#13
Jason in TX Senior Member Join Date: May 2010 Location: ⓉⒺXⒶⓈ Posts: 2,047	Re: A400 68C rubber stem bumpers Oh!! Haha. You mean those three empty holes?? Haha YUP! I need some! __________________ -------------- Drive it like you know how to fix it! DMAFC / OILERS CC-MC

11-13-2011, 01:41 PM	#14
Joop Senior Member Join Date: May 2010 Location: Glendale, AZ Posts: 2,952	Re: A400 68C rubber stem bumpers I told you so!

11-13-2011, 01:49 PM	#15
LukeDahlinger BANNED Join Date: Dec 2010 Posts: 956	Re: A400 68C rubber stem bumpers Put me down for 2 sets. __________________ Wanted- Feb. 1931 Parts Price List www.vintagefordfacts.blogspot.com

11-13-2011, 03:26 PM	#16
John Stone Senior Member Join Date: May 2010 Location: Wichita, Kansas Posts: 710	Re: A400 68C rubber stem bumpers I'll take a couple sets.

11-13-2011, 03:44 PM	#17
ajanke Junior Member Join Date: May 2010 Posts: 14	Re: A400 68C rubber stem bumpers I would like a couple of sets.

11-13-2011, 03:50 PM	#18
Roger V Senior Member Join Date: May 2010 Location: Michigan Posts: 1,593	Re: A400 68C rubber stem bumpers I'll take a set.

11-13-2011, 08:40 PM	#19
SteveB31 Senior Member Join Date: May 2010 Location: Englewood, Colorado Posts: 1,372	Re: A400 68C rubber stem bumpers I will take 20 sets, so we have some in the future for other restorers. Had three people ask me for those just this week. Steve Becker Bert's Model A Center 800-321-1931

11-13-2011, 09:08 PM	#20
BadgerA Senior Member Join Date: May 2010 Posts: 235	Re: A400 68C rubber stem bumpers About to start on a 68C myself. I will take three sets. Last edited by BadgerA; 11-13-2011 at 09:14 PM.

11-14-2011, 08:00 AM	#21
jw hash Senior Member Join Date: May 2010 Location: Auburn Washington Posts: 2,552	Re: A400 68C rubber stem bumpers Thanks for the responce Guy`s, I`m ordering them today they told me it would be 4 to 6 weeks lead time.I will let you know they come in. John

11-14-2011, 08:44 AM	#22
Joop Senior Member Join Date: May 2010 Location: Glendale, AZ Posts: 2,952	Re: A400 68C rubber stem bumpers Hi John Do you want us to start sending money now.

11-14-2011, 09:10 AM	#23
Jim in S.C. Member Join Date: May 2010 Posts: 72	Re: A400 68C rubber stem bumpers OK, OK, I guess I need a couple of sets! [email protected]

11-14-2011, 09:45 AM	#24
Glenn of northport Member Join Date: May 2010 Location: northport mi Posts: 87	Re: A400 68C rubber stem bumpers I will take a set

11-14-2011, 04:09 PM	#25
lfg Member Join Date: May 2010 Location: Arizona Posts: 50	Re: A400 68C rubber stem bumpers I could use 2 sets. Larry Gilbert

11-14-2011, 08:25 PM	#26
dshebuski Junior Member Join Date: May 2010 Location: manitowish waters wi. Posts: 19	Re: A400 68C rubber stem bumpers Sponsored Links (Register now to hide all advertisements) I will take two sets of the bumpers. Don Shebuski

11-14-2011, 09:39 PM	#27
oldoily Junior Member Join Date: May 2010 Location: Oxford, Kansas Posts: 10	Re: A400 68C rubber stem bumpers I will take two sets. Thanks

11-15-2011, 05:41 AM	#28
Roger Ball Junior Member Join Date: May 2010 Posts: 3	Re: A400 68C rubber stem bumpers I'll take two sets for my 68C project - starting soon.

11-15-2011, 07:51 AM	#29
A400 Guy Junior Member Join Date: May 2010 Location: Massachusetts Posts: 13	Re: A400 68C rubber stem bumpers I'll take a set as well. Tim O'Brien [email protected]

11-15-2011, 08:36 AM	#30
jw hash Senior Member Join Date: May 2010 Location: Auburn Washington Posts: 2,552	Re: A400 68C rubber stem bumpers Guy`s do not send any money until after I receive the bumpers, I just want to have them in my hands and make sure they are correct first, thanks John

11-15-2011, 02:29 PM	#31
Bill Underwood Senior Member Join Date: May 2010 Location: Tennessee Posts: 445	Re: A400 68C rubber stem bumpers PM sent, count me in. Bill U

11-18-2011, 10:03 AM	#32
B400 Member Join Date: May 2010 Posts: 98	Re: A400 68C rubber stem bumpers I would like three sets please. Do you have a expected delivery time? Can anyone help me locate the two rubber bumpers midway down the top rail and also the rubber strips located within the metal channel that rests against the quarter window rail. Any leads would be helpful. Thanks Mike 719-671-8006

11-18-2011, 12:33 PM	#33
mot Registered User Join Date: May 2010 Location: Sacramento Ca Posts: 1,179	Re: A400 68C rubber stem bumpers hey guys I notice there are several people here working on the 68C i keep the records for that body style and dont have your name please get ahold of me so i can record the data on this rare body style and maybe we can get together and get all the parts needed this also goes for the 400A guys,Joop is on here too thanks for the help sorry John I dont mean to cut into your thread but i think we can get some of these parts availible for the guys that need them tom moniz 68C record keeper [email protected]

11-18-2011, 03:59 PM	#34
asapguy Senior Member Join Date: May 2010 Location: Snohomish Wa. Posts: 389	Re: A400 68C rubber stem bumpers John, I will take a set. Perry

06-28-2018, 09:49 AM	#35
31Cabriolet68-C Senior Member Join Date: Jan 2018 Location: Greenwich, CT Posts: 140	Re: A400 68C rubber stem bumpers Any more bumpers available? I'm a new member of the Barn, and I'm looking at old posts... Thanks, John Baldwin