The Ford Barn

Ritzy1 · 07-04-2018, 08:41 PM

Anybody have a source for the washer (351536-S) and C-clip-like lock (7547) that secures the clutch and brake pedals to the ends of the clutch/brake pedal shaft (7506)?

I'm guessing I can find the various clevis pins used in the assembly from McMaster-Carr as I don't see them available from the usual sources.

Thanks!

51504bat · 07-04-2018, 09:49 PM

Mac Van Pelt or Barnfind08 here on the Barn are both good places to start. IMO.

Charlie Stephens · 07-04-2018, 10:28 PM

Give Bob Drake a call. They make the '39 pedal assembly and might stock a few parts left over from that product.

Charlie Stephens

V8COOPMAN · 07-04-2018, 11:24 PM

"Barnfind08" here on the "Barn. Bob Drake......that's funny! DD

Mac VP · 07-05-2018, 04:47 AM

We don’t have those items.....sorry.

36coupe · 07-05-2018, 06:31 AM

Sponsored Links (Register now to hide all advertisements)

Try C&G in ca

Mart · 07-05-2018, 06:47 AM

I was able to buy generic square section circlips from a bearing supply place. I made my own washers. But I'm in the UK. You might be able to find nos parts there. The generic parts were slightly thinner cross section, but did the job.

Mart.

V8COOPMAN · 07-05-2018, 08:17 AM

Click the link below. In post #5, "barnfind08" is stating that he has the clips NOS! Pay attention folks!! You can PM him directly from his post. DD

https://www.fordbarn.com/forum/showthread.php?t=246691

qmdv · 07-05-2018, 09:39 PM

Have an original 39 pedal assembly I bought 45 years ago for my dads 36 two door. He sold the car before we converted it. Been hanging on just in case but now you buy them new. Who would have thought 45 years ago

V8COOPMAN · 07-05-2018, 10:54 PM

Quote:

Originally Posted by qmdv

Have an original 39 pedal assembly I bought 45 years ago for my dads 36 two door. He sold the car before we converted it. Been hanging on just in case but now you buy them new. Who would have thought 45 years ago

If you haven't checked lately, you might be surprised at how much ORIGINAL Ford '39 pedal assemblies are bringing on 'the Bay'. They go for $150-200 frequently. DD

qmdv · 07-05-2018, 10:57 PM

Quote:

Originally Posted by V8COOPMAN

If you haven't checked lately, you might be surprised at how much ORIGINAL Ford '39 pedal assemblies are bringing on 'the Bay'. They go for $150-200 frequently. DD

May put it up on Ford Barn in a week or two

Ritzy1 · 07-06-2018, 05:17 AM

Thanks for your advice everyone. I'll contact Fred (Barnfind08) to see what he's got. V8COOPMAN, that link was a big help.

07-04-2018, 09:49 PM	#2
51504bat Senior Member Join Date: Sep 2013 Location: SoCal-Redlands Posts: 3,015	Re: Source for clutch/brake pedal assembly small parts Mac Van Pelt or Barnfind08 here on the Barn are both good places to start. IMO. __________________ Making the simple complicated for over 30 years.

07-04-2018, 10:28 PM	#3
Charlie Stephens Senior Member Join Date: May 2010 Location: Southern California Posts: 7,031	Re: Source for clutch/brake pedal assembly small parts Give Bob Drake a call. They make the '39 pedal assembly and might stock a few parts left over from that product. Charlie Stephens Last edited by Charlie Stephens; 07-04-2018 at 11:31 PM.

07-04-2018, 11:24 PM	#4
V8COOPMAN Senior Member Join Date: May 2010 Location: East Shore of LAKE HOUSTON Posts: 11,108	Re: Source for clutch/brake pedal assembly small parts "Barnfind08" here on the "Barn. Bob Drake......that's funny! DD __________________ *Click Links Below* __ ▼ *'35-'36 W/8BA & MECHANICAL FAN* *T5 W/TORQUE TUBE*

07-05-2018, 06:31 AM	#6
36coupe Senior Member Join Date: Oct 2012 Location: Eastcoast Posts: 863	Re: Source for clutch/brake pedal assembly small parts Sponsored Links (Register now to hide all advertisements) Try C&G in ca

07-05-2018, 06:47 AM	#7
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 8,749	Re: Source for clutch/brake pedal assembly small parts I was able to buy generic square section circlips from a bearing supply place. I made my own washers. But I'm in the UK. You might be able to find nos parts there. The generic parts were slightly thinner cross section, but did the job. Mart.

07-05-2018, 04:47 AM	#5
Mac VP Senior Member Join Date: May 2010 Location: Cincinnati, OH Posts: 1,361	Re: Source for clutch/brake pedal assembly small parts We don’t have those items.....sorry. __________________ VANPELT SALES LLC Cincinnati, Ohio Office: 513-724-9486 www.vanpeltsales.com www.classictransmission.com

07-05-2018, 08:17 AM	#8
V8COOPMAN Senior Member Join Date: May 2010 Location: East Shore of LAKE HOUSTON Posts: 11,108	Re: Source for clutch/brake pedal assembly small parts Click the link below. In post #5, "barnfind08" is stating that he has the clips NOS! Pay attention folks!! You can PM him directly from his post. DD https://www.fordbarn.com/forum/showthread.php?t=246691 __________________ *Click Links Below* __ ▼ *'35-'36 W/8BA & MECHANICAL FAN* *T5 W/TORQUE TUBE*

07-05-2018, 09:39 PM	#9
qmdv Senior Member Join Date: Dec 2012 Location: Payette, ID Posts: 935	Re: Source for clutch/brake pedal assembly small parts Have an original 39 pedal assembly I bought 45 years ago for my dads 36 two door. He sold the car before we converted it. Been hanging on just in case but now you buy them new. Who would have thought 45 years ago

07-06-2018, 05:17 AM	#12
Ritzy1 Senior Member Join Date: Feb 2016 Location: Plymouth, MA Posts: 207	Re: Source for clutch/brake pedal assembly small parts Thanks for your advice everyone. I'll contact Fred (Barnfind08) to see what he's got. V8COOPMAN, that link was a big help.