|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-11-2018, 11:56 AM | #1 |
Senior Member
Join Date: Jul 2017
Location: Spokane, Washington state
Posts: 250
|
1930 Cabriolet windshield hinge bolts
On a 1930 Cabriolet does the windshield hinge get screwed in from the bottom of the hinge into the weatherstrip into the top frame and if so do the round head bolts 1/4 diameter by 3/4 long have any special lockwashers?
thanks
__________________
68B frame# late May1930, fixed seat, Briggs build plate# & most parts, indicate July, or early Aug. 1930. |
03-11-2018, 03:36 PM | #2 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
Re: 1930 Cabriolet windshield hinge bolts
they are 1/4-20 X 5/8 slotted round head screws with a lock washer. and you are correct the screw goes through the hinge - rubber - and into the fixed nuts in the header.
|
Sponsored Links (Register now to hide all advertisements) |
|
03-11-2018, 03:43 PM | #3 |
Senior Member
Join Date: Jul 2017
Location: Spokane, Washington state
Posts: 250
|
Re: 1930 Cabriolet windshield hinge bolts
Sponsored Links (Register now to hide all advertisements)
Thanks again!
__________________
68B frame# late May1930, fixed seat, Briggs build plate# & most parts, indicate July, or early Aug. 1930. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|