08-06-2018, 11:21 PM | #1 |
Senior Member
Join Date: May 2010
Location: Palatine il
Posts: 320
|
Steering shaft
Hello again need help to get a stuck key out of cylinder. Also what keeps clylinder in place came out with ease. Help would be appreciated. Thanks.
|
08-07-2018, 12:04 AM | #2 |
Senior Member
Join Date: Apr 2015
Location: Sweden
Posts: 3,045
|
Re: Steering shaft
If it´s an early steering column lock you have a pin holding the cylinder in place.
Has to be drilled out. |
Sponsored Links (Register now to hide all advertisements) |
|
08-07-2018, 01:09 AM | #3 |
Senior Member
Join Date: May 2010
Location: Above the gnat line in Georgia
Posts: 7,009
|
Re: Steering shaft
If the lock cylinder came out with ease you're half way home. If you can't get the key out of the cylinder.. is the key in place, but the knob broken off'
__________________
Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm". |
08-07-2018, 09:57 AM | #4 |
Senior Member
Join Date: May 2010
Location: Palatine il
Posts: 320
|
Re: Steering shaft
Key not broke off, just will not come out. Did not release any pins to get clylinder out
|
08-07-2018, 11:02 AM | #5 |
Senior Member
Join Date: Oct 2013
Posts: 105
|
Re: Steering shaft
Try rotating it to the locked position. It may be oriented in the wrong position.
Hook |
08-07-2018, 11:20 AM | #6 |
Senior Member
Join Date: Jul 2010
Location: 36 miles north of Albany NY
Posts: 2,944
|
Re: Steering shaft
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|