Model A Floor Insulation

[JohnB15632]

I wanted to thank all of you guys for your advise on insulating the floor of my Model A.

I have completed the insulation installation.
Now onto the next project.

Thanks!!!!!

[chap52]

Nice job. I am sure it will prove to be well worth the effort and expense.
Thanks for the update.

[KGBnut]

Nice job. I did something similar, but not nearly as tidy. I bet it will be quieter and more comfortable.

Ken

[BRENT in 10-uh-C]

Originally Posted by JohnB15632

I wanted to thank all of you guys for your advise on insulating the floor of my Model A.

I have completed the insulation installation.
Now onto the next project.

Thanks!!!!!

What did you do for the roof area?

[Y-Blockhead]

Originally Posted by JohnB15632

I wanted to thank all of you guys for your advise on insulating the floor of my Model A.

I have completed the insulation installation.
Now onto the next project.

Thanks!!!!!

Good Job!!

I just recently insulated the floor and doors in my Town Sedan. Since my car was "put together" I couldn't cover everything as you did. One of these days if I ever have the back seat backrest out I would like to insulate the rear of the body.

I think insulating the doors and cowl area gave me the biggest change. It really makes the car sound solid, especially when closing the doors.

[JohnB15632]

Sponsored Links (Register now to hide all advertisements)

To Brent in 10-uh-C,

I have only started on the top. I have the cushion material and the vinyl material just laid out on the top to get the vinyl to "relax". I am going to work on the top this summer.
Thanks,

[BRENT in 10-uh-C]

Originally Posted by JohnB15632

To Brent in 10-uh-C,

I have only started on the top. I have the cushion material and the vinyl material just laid out on the top to get the vinyl to "relax". I am going to work on the top this summer.
Thanks,

I have insulated the roof section of several Sedans and have found this is huge at keeping temps at bay.

[aermotor]

Nice job. If you are interested in temp control as well as noise, I found that the stainless muffler shield really helped.

John

[Y-Blockhead]

Originally Posted by aermotor

Nice job. If you are interested in temp control as well as noise, I found that the stainless muffler shield really helped.

John

John, that is good to know.

I used DynaMat for sound, then insulation for heat and finally carpet. Very comfortable in my Town Sedan. (Sorry, I like pictures... )

[Don Turley]

Originally Posted by BRENT in 10-uh-C

I have insulated the roof section of several Sedans and have found this is huge at keeping temps at bay.

Brent, what method did you use to insulate the roof section?

[Anteek29]

I am impressed with your skill and craftsmanship!