|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-30-2018, 05:03 PM | #1 |
Senior Member
Join Date: Jun 2013
Location: Reno Nevada
Posts: 391
|
1933 -34 Ford sheet metal
City:
Anchorage
State:
ALASKA
Hey Guys ! I am looking for a patch panel for my passenger side fire wall. The previous owner cut a battery box hole in the otherwise nice firewall. all 33 - 36 ford cars and trucks have the same area needed for my project. This will increase my options .
Also looking for a outside header above the windshield panel. All the 33 - 34 take the same part. Mine looks like someone hauled something on the roof and tried to repair it , not a good job. Thanks Vic Last edited by Vics Stuff; 10-28-2018 at 01:16 AM. |
10-11-2018, 12:31 AM | #2 |
Senior Member
Join Date: Jun 2013
Location: Reno Nevada
Posts: 391
|
Re: 1933 -34 Ford sheet metal
bump
|
Sponsored Links (Register now to hide all advertisements) |
|
10-20-2018, 11:40 PM | #3 |
Senior Member
Join Date: Jun 2013
Location: Reno Nevada
Posts: 391
|
Re: 1933 -34 Ford sheet metal
Had some leads but none panned out.
|
10-28-2018, 01:14 AM | #4 |
Senior Member
Join Date: Jun 2013
Location: Reno Nevada
Posts: 391
|
Re: 1933 -34 Ford sheet metal
Did some research and found that the section of firewall needed for my 33 is the same for all 33 -36 ford cars and trucks. This will open up more options.
Any leads also appreciated. Vic |
11-04-2018, 11:16 PM | #5 |
Senior Member
Join Date: Jun 2013
Location: Reno Nevada
Posts: 391
|
Re: 1933 -34 Ford sheet metal
Getting closer but no cigar
|
12-30-2018, 03:41 AM | #6 |
Senior Member
Join Date: Jun 2013
Location: Reno Nevada
Posts: 391
|
Re: 1933 -34 Ford sheet metal
Sponsored Links (Register now to hide all advertisements)
Any help is appreciated |
01-18-2019, 04:54 PM | #7 |
Senior Member
Join Date: Jun 2013
Location: Reno Nevada
Posts: 391
|
Re: 1933 -34 Ford sheet metal
Still on the hunt. Have located some parts but those were worse than what I have .
Vic |
01-28-2019, 02:09 AM | #8 |
Senior Member
Join Date: Jun 2013
Location: Reno Nevada
Posts: 391
|
Re: 1933 -34 Ford sheet metal
Still looking , found a lot parts but all are worse that what I have .
Thanks for this site Vic |
|
|
Sponsored Links (Register now to hide all advertisements) |
|