|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-04-2019, 07:55 PM | #1 |
Member
Join Date: Jan 2014
Location: Omaha Ne.
Posts: 34
|
55 Ford Fairlane hinge pin
My driver door on my 55 is starting to drop, I'm pretty sure the hinge pin on the bottum hinge needs to be replaced. When I look in my parts catalog I can find a pin for a 55 but no bushings, before I pull the hinge I would like to have the parts to fix it. Anyone know if the 55 used bushings or just pins?
|
12-04-2019, 09:16 PM | #2 |
Senior Member
Join Date: May 2012
Location: Middle TN
Posts: 1,060
|
Re: 55 Ford Fairlane hinge pin
Maybe just the pins. Dearborn Classics shows bushings for for '55 Birds and F100 only. '57 is the earliest full size Ford they catalog the bushings for.
https://www.dearbornclassics.com/195...ro-torino.html
__________________
Often wrong but never in doubt. |
Sponsored Links (Register now to hide all advertisements) |
|
12-05-2019, 09:31 AM | #3 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,471
|
Re: 55 Ford Fairlane hinge pin
Sponsored Links (Register now to hide all advertisements)
If they (bushings) are worn, you will most likely have to have then redone (add material and re-drill) and/or see if the bushings can be drilled OS to accept the later brass bushing. as the hinges are hard to come by.
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
|
|
Sponsored Links (Register now to hide all advertisements) |
|