Go Back   The Ford Barn > General Discussion > Model T (1909-1927)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-16-2020, 10:00 AM   #1
richie rich
Junior Member
 
Join Date: Nov 2019
Location: maricopa az.
Posts: 12
Default clutch plate

i have a pin on clutch plate that is stuck down and the clutch finger has a lot of play can i take out the clutch housing bolts to the brake drum so see the damage i do not have the time to pull the engine out and the rear end right now
richie rich is offline   Reply With Quote
Old 03-16-2020, 01:50 PM   #2
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,346
Default Re: clutch plate

Removing the hogs head can be a bear. Some depends on whether it has a starter or not. The top will come off but other things may need to be removed or moved out of the way to get it off & back on again. I don't know if it will allow much disassembly though. This is one persons procedure. There are likely others too.
http://www.mtfca.com/discus/messages...tml?1348584247
rotorwrench is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 03-16-2020, 09:29 PM   #3
redmodelt
Senior Member
 
redmodelt's Avatar
 
Join Date: May 2010
Location: Portland OR
Posts: 6,339
Default Re: clutch plate

https://www.mtfca.com/phpBB3/viewtop...p=84113#p84113
__________________
I know the voices aren't real but damn they have some good ideas!
redmodelt is offline   Reply With Quote
Old 03-18-2020, 03:28 PM   #4
fordwife
Senior Member
 
Join Date: Dec 2015
Posts: 287
Default Re: clutch plate

My motto is : if you don't have time to do it right, when will you find time to do it over?
fordwife is offline   Reply With Quote
Old 03-20-2020, 05:39 PM   #5
fordwife
Senior Member
 
Join Date: Dec 2015
Posts: 287
Default Re: clutch plate

Sponsored Links (Register now to hide all advertisements)
I re-read your post, and if I am understanding your problem correctly, the engine-trans will have to come out and the trans will have to be disassembled at least the rear plate that holds the 3 fingers will have to be removed.
fordwife is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:33 PM.