!932 Roadster/Phaeton top iron parts

[aussiesteve]

I,m just wondering if certain parts are available for my 32 Phaeton top irons.
I have a set of top irons that are missing the front corner piece that slides over the windshield post ,
The front top bow also attaches to this piece.
Before I fabricate the pieces,I thought I,d see if that piece was available.
Thanks

[deuce lover]

Check with Karl Wescott as he is in the process of making 32 roadster top irons.That piece is the same.

[uncle buck]

I'm sure Karl Wescott should be able to take care of you. Hopefully he will chime in , otherwise give him a call or message him here

[Karl Wescott]

I should have those in about 60 days... I will not know pricing until I actually get some made.

[aussiesteve]

Originally Posted by Karl Wescott

I should have those in about 60 days... I will not know pricing until I actually get some made.

Thanks for the info
Let me know when you have a price

[Karl Wescott]

Sponsored Links (Register now to hide all advertisements)

Fresh from the foundry. 304 stainless.

[DavidG]

Karl,


Dumb question, but here goes. Will there be only a single attachment to the header bow per side?

[Karl Wescott]

I photographed the top of one side and the bottom of the other, the web on the bottom of the casting shadowed the header mounting screw location.


These are drilled/countersunk for 5/16 on the inboard holes and 1/4 on the outboard holes as per the originals I examined.


I attached another photo for clarity.


The holes for attaching to the irons will have to be drilled.

[uncle buck]

Like all of Wescotts castings, they look great! Great job Karl

[DavidG]

Karl,


Thanks for the clarification (I assumed as much, but some might not.)

[aussiesteve]

Received my corner blocks from Karl.
Very nice,reasonably priced and prompt service.