The Ford Barn

Mitch//pa · 07-30-2010, 09:11 AM

its a bearing puller used for rears transmissions etc.. very universal

i found the rear drum seal spring chewed up inside. who ever put the seal in had it all dented and wacked up. i like to pack the inside of the seal with grease. that holds the spring from popping out when installing it.
THESE ARE SNAP-ON

Russ/40 · 07-30-2010, 10:23 AM

As long as your working with a "quality" tool, I can see that working.

82ndscotty · 07-30-2010, 10:45 AM

Sponsored Links (Register now to hide all advertisements)

i use a otc pitman arm puller, has not let me down yet. scotty

07-30-2010, 10:23 AM	#2
Russ/40 Senior Member Join Date: May 2010 Location: Santee, California Posts: 3,505	Re: this is what i use to pull rear drums As long as your working with a "quality" tool, I can see that working.

07-30-2010, 10:45 AM	#3
82ndscotty Member Join Date: May 2010 Posts: 35	Re: this is what i use to pull rear drums Sponsored Links (Register now to hide all advertisements) i use a otc pitman arm puller, has not let me down yet. scotty