The Ford Barn

Charles Reese · 06-13-2010, 05:26 PM

Plan to use a thread file to enhance the serrations around my fenders. I have made a note (don’t recall source) to use the 18TPI side, but just found that the 24TPI side fits my existing serrations better. Any possibility HF started with 24 and changed later?

Tom Wesenberg · 06-14-2010, 07:26 AM

Quote:

Originally Posted by Charles Reese

Plan to use a thread file to enhance the serrations around my fenders. I have made a note (don’t recall source) to use the 18TPI side, but just found that the 24TPI side fits my existing serrations better. Any possibility HF started with 24 and changed later?

Gotta be careful when using just initials. I thought HF stands for Harbor Frieght.

Charles Reese · 06-14-2010, 11:52 AM

HF = Henry F

need to dress up a coupla places on the bead where weld was required

Mike V. Florida · 06-14-2010, 05:53 PM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by Charles Reese

HF = Henry F

What does Henry Fontaine have to do with Fords?

06-13-2010, 05:26 PM	#1
Charles Reese Senior Member Join Date: May 2010 Location: Richmond, VA Posts: 882	Fender Serrations Plan to use a thread file to enhance the serrations around my fenders. I have made a note (don’t recall source) to use the 18TPI side, but just found that the 24TPI side fits my existing serrations better. Any possibility HF started with 24 and changed later?

06-14-2010, 11:52 AM	#3
Charles Reese Senior Member Join Date: May 2010 Location: Richmond, VA Posts: 882	Re: Fender Serrations HF = Henry F need to dress up a coupla places on the bead where weld was required