The Ford Barn

jhowes · 06-15-2019, 03:05 PM

Does anyone have a good way of getting the bearings off of the carrier? Jack

Joe K · 06-15-2019, 03:14 PM

Sponsored Links (Register now to hide all advertisements)

Bearing "splitter" sold at Harbor Freight.

https://www.harborfreight.com/bearin...bearing+puller

You'll need to have the carrier "split" and use a "bridge" over the hole in the bearing mount.

I have one here I took off using a sharp chisel - but it messed up the bearing seat slightly - which I can clean up with a file.

Joe K

06-15-2019, 03:05 PM	#1
jhowes Senior Member Join Date: Jul 2010 Location: upstate NY near Mass border Posts: 789	Differential Carrier Bearings Does anyone have a good way of getting the bearings off of the carrier? Jack

06-15-2019, 03:14 PM	#2
Joe K Senior Member Join Date: Jul 2010 Location: Cow Hampshire Posts: 4,188	Re: Differential Carrier Bearings Sponsored Links (Register now to hide all advertisements) Bearing "splitter" sold at Harbor Freight. https://www.harborfreight.com/bearin...bearing+puller You'll need to have the carrier "split" and use a "bridge" over the hole in the bearing mount. I have one here I took off using a sharp chisel - but it messed up the bearing seat slightly - which I can clean up with a file. Joe K __________________ Shudda kept the horse.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode