|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-18-2013, 08:06 PM | #1 |
Senior Member
Join Date: Nov 2012
Location: Commerce Twp, Mi
Posts: 143
|
What Harness Do I Have
Just curious what this harness was originally for.
This is the harness that was in my 1931 S/W Fordor 160B. 5 of the wires were never hooked up and were bundled in the frame on the drivers side. The headlights had the reflectors for the parking lights but no connector was installed. I will probable need to get a new harness because this one has a strong smoke odor that I don't think I can get out. I did buy an ozone generator & will try it but don't have a lot of hope. I have the led turn signals that go in the bumpers so don't need that wiring as they have separate wires. I think I want to reconnect the parking lights & cowl lights. Not sure what was hooked up because some of the wires got burned in the garage fire. Not sure how good my notation will show up in the picture |
02-18-2013, 09:00 PM | #2 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: What Harness Do I Have
That looks like the lights harness for cowl lights. I'd buy the set for parking lights in the buckets, if that's what you have and want to use. Then you will have to run another wire for the cowl lights.
|
Sponsored Links (Register now to hide all advertisements) |
|
02-18-2013, 09:28 PM | #3 |
Senior Member
|
Re: What Harness Do I Have
Sponsored Links (Register now to hide all advertisements)
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
|
|
Sponsored Links (Register now to hide all advertisements) |
|