11-17-2019, 09:43 AM | #1 |
Senior Member
Join Date: Sep 2019
Location: Savannah, Ga
Posts: 225
|
Thread sealant
I am about to replace the original cast iron heads on an 8ba V8. I have a question regarding which thread sealant to use. I have both of the pictured products on hand. I also have read some of the prior posts on thread sealants. I am not necessarily asking which is the superior product, I am only inquiring whether both are satisfactory for this use. Thanks for any input.
|
11-17-2019, 10:01 AM | #2 |
Senior Member
Join Date: Jun 2013
Location: east coast
Posts: 113
|
Re: Thread sealant
I have primarily used the #2 non-hardening the other has teflon in it but either one will be satisfactory.
|
Sponsored Links (Register now to hide all advertisements) |
|
11-17-2019, 10:19 AM | #3 |
Senior Member
Join Date: Oct 2016
Location: harpursville ny
Posts: 1,040
|
Re: Thread sealant
Along with applying to the bolts I also smear the threads in the block as much of the sealant from the bolts will be left on top of the block when you screw them in.
|
11-17-2019, 10:38 AM | #4 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,921
|
Re: Thread sealant
This works great also for head bolt and studs threads.
|
11-17-2019, 11:56 AM | #5 |
Senior Member
Join Date: Sep 2019
Location: Savannah, Ga
Posts: 225
|
Re: Thread sealant
Thank you for your responses.
|
11-17-2019, 05:11 PM | #6 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,526
|
Re: Thread sealant
Sponsored Links (Register now to hide all advertisements)
|
11-18-2019, 07:20 AM | #7 |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,062
|
Re: Thread sealant
Me, I'd use the thread sealant with PTFE. Also, put a good amount of anti-seize on the sides of the bolts and a little bit of moly-lube/grease under the heads to help with more accurate torque readings.
Also, no matter which sealer you use - let the engine sit for at least a day before you fire it up . . . helps stuff harden a bit. |
11-18-2019, 07:27 AM | #8 |
Senior Member
Join Date: Sep 2019
Location: Savannah, Ga
Posts: 225
|
Re: Thread sealant
Thanks again for all the input.
|
11-18-2019, 05:26 PM | #9 |
Senior Member
Join Date: Feb 2013
Location: Pittsford NY. USA
Posts: 1,096
|
Re: Thread sealant
Thread sealant for me .......
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|