|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-07-2013, 08:42 AM | #1 |
Senior Member
Join Date: May 2010
Location: Victoria, Australia
Posts: 1,176
|
multi plate clutch
I have some multi plate flywheels. On some, the splines for the clutch are part of the flywheel, and on others, the splines are a separate item and bolted to the flywheel. Are the bolt on splines a variation of the original setup, or has someone in the past machined off worn splines and fitted replacement splines?
|
03-07-2013, 08:52 AM | #2 |
Senior Member
Join Date: May 2010
Location: Pitt Meadows BC
Posts: 1,003
|
Re: multi plate clutch
I have never seen a multi-plate flywheel with bolted in splines. Got any pix?
|
Sponsored Links (Register now to hide all advertisements) |
|
03-07-2013, 10:57 AM | #3 |
BANNED
Join Date: May 2010
Location: California, Maryland
Posts: 1,421
|
Re: multi plate clutch
A few pictures would really help.. I have 4-5 & 1 NOS & none bolt on..
|
03-07-2013, 11:41 AM | #4 |
BANNED
Join Date: May 2010
Location: Gothenburg Nebraska Just off I-80
Posts: 4,893
|
Re: multi plate clutch
I have seen one bolt on style. Unfortunately the area that bolted to the crank shaft was broke out. I think it was likely thinner in that area which contributed to its failure. Rod
__________________
Do the RIGHT thing - Support the H.A.M.B. Alliance!!!! |
03-07-2013, 04:35 PM | #5 |
Member
Join Date: May 2010
Location: Bowling Green, KY
Posts: 49
|
Re: multi plate clutch
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|