The Ford Barn

Ronnie · 02-22-2017, 09:56 AM

Quote:

Originally Posted by JSeery

If you are looking for a modern brass fitting with a restriction hole in it turbo charger oil fittings are available.

Restrictor diameter: 0.065 hole size
Input: 1/8" NPT male
Output: 1/8" NPT female

It is a weatherhead #1512

R

JSeery · 02-22-2017, 10:36 AM

Thanks Ronnie.

macdonge · 02-22-2017, 04:22 PM

Quote:

Originally Posted by 51 MERC-CT

If there is more than one hole in the system, only the smallest diameter one is the 'restricted hole', the rest are just drain holes.

Quite correct 51 MERC-CT. The hole on the oil pan return is bigger than in the filter standpipe.

1 Raggedy Ride · 02-28-2017, 12:12 PM

Bill, I am still learning about attachments....[IMG]2657[/IMG]

02-22-2017, 10:36 AM	#22
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: oil canister restrictor fitting Thanks Ronnie.

02-28-2017, 12:12 PM	#24
1 Raggedy Ride Senior Member Join Date: Aug 2012 Location: Henrietta, New York Posts: 118	Re: oil canister restrictor fitting Bill, I am still learning about attachments....[IMG]2657[/IMG] __________________ 1 RAGGEDY RIDE Last edited by 1 Raggedy Ride; 11-10-2019 at 08:07 PM.