Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-03-2017, 09:47 PM   #1
Synchro909
Senior Member
 
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 3,453
Default 21" Radial ply tyres

There has been discussion here now and then about radial ply tyres but nearly always 19". The general consensus seems to be that they improve the ride and road holding no end and I don't doubt it. Does anybody have experience with the 21" version. Coker don't say much about them on their site. I even had to enlarge the picture to be able to see that they are 5.50/6.00R21. At those figures, it seems to me that they are probably quite large and the rolling diameter would be about 2 1/2" more than the standard 21' cross ply tire and the tread much wider.
At $240 each, they are cheaper than the 19" ones (surprise) so I either buy a set of those or buy a set of wheels, then pay more for the tyres as well. Over here, pre-depression (28/9) cars are more common than 1930 ones and no 1931 Model As were sent to this country in the day. Finding a set of 19" wheels won't be as easy as over there but if I buy in the US, I don't get to inspect them and then there is the freight. AARRGGGGHHH!
I'm leaning towards the 21" tyres for obvious reasons but would like to get some feedback first.
Thanks in advance.
__________________
My Model A is not slow - it's buffering.
Synchro909 is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:47 PM.