The Ford Barn

Ken Arms · 08-01-2018, 11:21 AM

Hello Barners, can anyone clear my fuzzy brain? How does the taillight brace bolt to the car? I see the obvious holes where it lines up with the light stand but then what? one of the two holes looks like it lines up with a fender bolt but not the other?? Question two, should there be some type of welting when mounting the inner front fender pieces to the frame or just metal to metal? Thank you Ken

1934 · 08-01-2018, 11:37 AM

Ken, there should be webbing between the inner front fenders and frame, similar to the body to frame webbing.
Doug.

95476 · 08-01-2018, 12:05 PM

Quote:

Originally Posted by Ken Arms

Hello Barners, can anyone clear my fuzzy brain? How does the taillight brace bolt to the car? I see the obvious holes where it lines up with the light stand but then what? one of the two holes looks like it lines up with a fender bolt but not the other?? Question two, should there be some type of welting when mounting the inner front fender pieces to the frame or just metal to metal? Thank you Ken

On three of mine the taillight brace is secured by one bolt.
I had to check when i mounted the taillight stands on my Victoria project.
Odd why they didn't secure it with two.

mfagan · 08-01-2018, 02:12 PM

I only had one hole line up on mine.

Mart · 08-02-2018, 04:32 AM

I don't have it in front of me to look at, but is the bracket universal, and fits both sides? One side uses one bolt hole, the other uses the other hole.

I can look at my relatively unmolested 33 coupe later if necessary.

Mart.

DavidG · 08-02-2018, 08:15 AM

Sponsored Links (Register now to hide all advertisements)

Yes, the same bracket is used on both sides.

08-01-2018, 11:21 AM	#1
Ken Arms Senior Member Join Date: May 2010 Location: Essex Vermont Posts: 599	2 34 questions Hello Barners, can anyone clear my fuzzy brain? How does the taillight brace bolt to the car? I see the obvious holes where it lines up with the light stand but then what? one of the two holes looks like it lines up with a fender bolt but not the other?? Question two, should there be some type of welting when mounting the inner front fender pieces to the frame or just metal to metal? Thank you Ken

08-01-2018, 11:37 AM	#2
1934 Senior Member Join Date: Jul 2010 Location: Quebec, Canada Posts: 415	Re: 2 34 questions Ken, there should be webbing between the inner front fenders and frame, similar to the body to frame webbing. Doug.

08-01-2018, 02:12 PM	#4
mfagan Senior Member Join Date: May 2010 Location: Kaufman, TX Posts: 822	Re: 2 34 questions I only had one hole line up on mine. __________________ Marvin Fagan 214-697-8430

08-02-2018, 04:32 AM	#5
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 8,752	Re: 2 34 questions I don't have it in front of me to look at, but is the bracket universal, and fits both sides? One side uses one bolt hole, the other uses the other hole. I can look at my relatively unmolested 33 coupe later if necessary. Mart.

08-02-2018, 08:15 AM	#6
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,101	Re: 2 34 questions Sponsored Links (Register now to hide all advertisements) Yes, the same bracket is used on both sides.