|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-27-2014, 09:04 PM | #1 |
Junior Member
Join Date: Jun 2010
Posts: 15
|
48-52 f1 pitman arm nut. Need help
COULD SOMEBODY TELL ME what size nut goes on the 48-52 ford F1 sector shaft where the pitman arm goes ? i believe it 7/8" x 14 tpi. is this correct ? i need 2 nuts real bad so if anybody has any for sale please let me know. i have 2 real nice ones i believe for 32 ford boxes but there different i believe. all my threads are real nice. any help is greatly appreciated.
regards bob |
10-27-2014, 10:30 PM | #2 |
Senior Member
Join Date: Nov 2010
Location: NM
Posts: 2,438
|
Re: 48-52 f1 pitman arm nut. Need help
That is correct. See below...
It's a standard 7/8-UNF grade 8 nut. Check NAPA
__________________
'52 F-1, EAB flathead Last edited by Ross F-1; 10-27-2014 at 10:35 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
10-27-2014, 10:58 PM | #3 |
Junior Member
Join Date: Jun 2010
Posts: 15
|
Re: 48-52 f1 pitman arm nut. Need help
Sponsored Links (Register now to hide all advertisements)
regards old man bob |
|
|
Sponsored Links (Register now to hide all advertisements) |
|