The Ford Barn

Cometeguy · 01-04-2021, 02:03 PM

Sponsored Links (Register now to hide all advertisements)

Need the following for 1938 Business Coupe:

ONE inside door panel moulding. This is one of the four narrow trim strips that are vertical in the middle of the inside door panel. It appears to be half round, about .30 in. wide and a little over 22 in. long.

Also need a package tray under the rear window. One piece is 53 in long and the other piece is about 19 in. wide at center. I will be happy to get just a pattrn and photo installed in a coupe.

Thank you.

Gary Wright
916-837-7170

01-04-2021, 02:03 PM	#1
Cometeguy Senior Member Join Date: May 2010 Location: Fair Oaks, CA Posts: 323	1938 Coupe and Sedan City: Fair Oaks State: CA Sponsored Links (Register now to hide all advertisements) Need the following for 1938 Business Coupe: ONE inside door panel moulding. This is one of the four narrow trim strips that are vertical in the middle of the inside door panel. It appears to be half round, about .30 in. wide and a little over 22 in. long. Also need a package tray under the rear window. One piece is 53 in long and the other piece is about 19 in. wide at center. I will be happy to get just a pattrn and photo installed in a coupe. Thank you. Gary Wright 916-837-7170