|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-19-2021, 06:27 PM | #1 |
Senior Member
Join Date: Dec 2019
Location: Gardnerville, Nevada
Posts: 185
|
34 ford radiator where to purchase?
I need a radiator for my 34 ford with a flathead engine. I hear that Brass Works Radiators are a good choice. I also would like to know if I need to use a pressure CAP. And how much pressure to run. I am at 5500 feet elevation in the town of Gardnerville, Nevada. Last time this engine ran was in the Bay Area Stock Radiator no pressure cap, No problems over heating. Thank for any imput! Stan
|
04-19-2021, 06:35 PM | #2 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 34 ford radiator where to purchase?
BrassWorks is who I would use and if you go with the stock configuration it does not use a pressure cap.
|
Sponsored Links (Register now to hide all advertisements) |
|
04-19-2021, 07:07 PM | #3 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,317
|
Re: 34 ford radiator where to purchase?
Brassworks is the best, and given the apparent quality of your car, it deserves the best.
|
04-19-2021, 07:19 PM | #4 |
Senior Member
Join Date: May 2013
Location: Pa.
Posts: 2,172
|
Re: 34 ford radiator where to purchase?
As J says Brass works is a good choice, also Brass Works will build it how ever you want. He’ll make it totally to stock spec or make it look stock but pressurized with a pressure cap. He’ll add rows for additional cooling also.
__________________
Nomad |
04-19-2021, 08:25 PM | #5 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 34 ford radiator where to purchase?
I think the pressurized ones relocate the filler neck.
|
04-19-2021, 08:28 PM | #6 |
Senior Member
Join Date: May 2010
Location: MN
Posts: 7,053
|
Re: 34 ford radiator where to purchase?
Sponsored Links (Register now to hide all advertisements)
|
04-19-2021, 09:23 PM | #7 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 34 ford radiator where to purchase?
I'm not even sure a 4 lb cap is a good idea on the stock type upper tank. Because of the size (surface area) it is easy to balloon it or at the least tin-can it with heat cycles and fatigue the metal.
|
04-19-2021, 10:01 PM | #8 |
Senior Member
Join Date: May 2010
Location: MN
Posts: 7,053
|
Re: 34 ford radiator where to purchase?
JSeery I don't think that would happen with a overflow tube. There is very little material construction difference of a 34 rad and a 38 radiator. As long as the overflow tube is relative to the the pressure cap. I agree I don't think there is a huge difference with a 4lb cap.
|
04-20-2021, 07:57 AM | #9 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 34 ford radiator where to purchase?
I wouldn't use one, but that is just me.
|
04-20-2021, 09:30 PM | #10 |
Senior Member
Join Date: May 2010
Posts: 2,484
|
Re: 34 ford radiator where to purchase?
Just be ready for 10 weeks out or more with Brassworks. Newc
|
04-22-2021, 12:57 PM | #11 |
Senior Member
Join Date: Feb 2011
Posts: 2,113
|
Re: 34 ford radiator where to purchase?
Brassworks set up my 35.
The overflow tube is set up to take a 3-4# valve. The stock system isn’t designed to take a pressure cap. The valve does not allow enough pressure to affect a stock tank in good condition. They can install the threaded fitting & you can add valve later. They also restore radiators, if your tanks/frame are in good condition he will install a more efficient tube/fin design. Runs really well. They don’t run a high production shop, his craftsmen do one at a time, piece by piece. There is a guy in your town working on early brass cars, ask Jeff- he knows the guys at BW
__________________
Tim Downtown, Ca |
|
|
Sponsored Links (Register now to hide all advertisements) |
|