Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-29-2012, 10:09 AM   #1
RockHillWill
Senior Member
 
RockHillWill's Avatar
 
Join Date: May 2010
Location: Rock Hill, S.C.
Posts: 985
Default Panel Delivery Post on Metal Shaping Site

Most of you that know me know that I like to hang around some of the sheet metal forums and I have learned a lot from those folks. Several of them have asked me to post info after I got back from the meets and I have done so.

Here is a link to the post that I made:
http://allmetalshaping.com/showthread.php?t=6434

If the doesn't get you thru to the site, here is a link directly to the album that I made there.
http://allmetalshaping.com/album.php?albumid=98

It is more about sheet metal on the Panel Delivery than the actual restoration work, but some might find it interesting.
__________________
Uncle Bud says "too soon old, too late smart!"
RockHillWill is offline   Reply With Quote
Old 06-29-2012, 01:50 PM   #2
Tom from Drippin'
Senior Member
 
Tom from Drippin''s Avatar
 
Join Date: May 2010
Location: Dripping Springs, Texas
Posts: 286
Default Re: Panel Delivery Post on Metal Shaping Site

The site asks for user name & password?????????????
__________________
The pursuit of excellence is healthy and rewarding.
The pursuit of perfection is frustrating, neurotic and a terrible waste of time.
Tom from Drippin' is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 06-29-2012, 02:58 PM   #3
Mike V. Florida
Senior Member
 
Mike V. Florida's Avatar
 
Join Date: May 2010
Location: South Florida
Posts: 14,051
Send a message via AIM to Mike V. Florida
Default Re: Panel Delivery Post on Metal Shaping Site

Same here the album requires that we join the Forum to see the pics.
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II
Mike V. Florida is offline   Reply With Quote
Old 06-29-2012, 05:06 PM   #4
CarlG
Senior Member
 
CarlG's Avatar
 
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 8,536
Default Re: Panel Delivery Post on Metal Shaping Site

The link to the post with pictures works OK, it's just the album that requires name and password.
CarlG is offline   Reply With Quote
Old 06-29-2012, 05:20 PM   #5
Aerocraft
Senior Member
 
Aerocraft's Avatar
 
Join Date: May 2010
Location: Naperville, IL
Posts: 1,378
Default Re: Panel Delivery Post on Metal Shaping Site

Great job with the marvelous work. I saw it at OSH and was very impressed. Now, the big question is what is next? Gar Williams
Aerocraft is offline   Reply With Quote
Old 06-29-2012, 10:26 PM   #6
RockHillWill
Senior Member
 
RockHillWill's Avatar
 
Join Date: May 2010
Location: Rock Hill, S.C.
Posts: 985
Default Re: Panel Delivery Post on Metal Shaping Site

Sorry about the problem with the links. My password is saved on my cmputer, so it worked when I tested it.

Here is a link to my webpage that has been updated often since I started this project. I am adding more daily as I go back and gather photos from the last several months. I have not done much updating for a while, but am doing so now since the project is completed.

http://www.mantiquesresto.com/Projec...PD/dfpd01.html

Click on the 'red' colored box at the top of the page to access the restoration section.

If you click on the colored 'boxes' on some of the later pages, it will go to a more detailed page.
__________________
Uncle Bud says "too soon old, too late smart!"
RockHillWill is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:20 PM.