Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-18-2018, 12:30 PM   #1
BillCNC
Senior Member
 
BillCNC's Avatar
 
Join Date: Aug 2017
Location: SoCal Desert
Posts: 826
Question Horn Electrical Connections

Hey All,

Seem's the last thing in putting my car back together is avoiding me like the plague. I cannot find the pictures I took of the horn connection and I don't remember if there was a pigtail coming from the horn or not. The harness has bullet connectors on the yellow and the blue/yellow stripe wires and nothing coming from the Horn.

Are there pigtails that come from the horn brushes that have bullet points on them that I may have misplaced?

The horn is a 6v Spartan.

Regards
Bill
BillCNC is offline   Reply With Quote
Old 03-18-2018, 12:47 PM   #2
1955cj5
Senior Member
 
1955cj5's Avatar
 
Join Date: Apr 2015
Location: Boise, Idaho
Posts: 1,578
Default Re: Horn Electrical Connections

If you take the rear cover off, you should see two clips, as in this picture from google.

The bullet ends of the harness slip under these clips from the side.

The cover should have an opening for the wires.
Attached Images
File Type: jpg horn-web.jpg (197.8 KB, 96 views)
__________________
Early '29 CCPU that had a 4-speed, but not any more.......in the family since '62
1955cj5 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 03-18-2018, 01:43 PM   #3
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Horn Electrical Connections

Here's how they plug in.
Attached Images
File Type: jpg Horn Wire Terminals.jpg (49.9 KB, 116 views)
Tom Wesenberg is offline   Reply With Quote
Old 03-18-2018, 02:29 PM   #4
BillCNC
Senior Member
 
BillCNC's Avatar
 
Join Date: Aug 2017
Location: SoCal Desert
Posts: 826
Default Re: Horn Electrical Connections

Doh!

Ok, than you gentlemen, I must be standing near a puddle of ether.

Regards
Bill
BillCNC is offline   Reply With Quote
Old 03-19-2018, 07:26 AM   #5
BILL WILLIAMSON
Senior Member
 
BILL WILLIAMSON's Avatar
 
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
Default Re: Horn Electrical Connections

Sponsored Links (Register now to hide all advertisements)
After plugin in the wires inside the horn, I put a dab of clear silicone rubber on them, so they didn't pull out, when I dusted the car!
Bill Shiny
__________________
"THE ASSISTANT GURU OF STUFF"
BILL WILLIAMSON is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:36 AM.