The Ford Barn

jhaase · 07-14-2022, 08:31 PM

I have a 1954 Ford Crestline with a 239 & Ford EBU carb, I looked in my service manual supplement & no where can I find how to adjust the right-side carb dashpot. I found the adjustment for the earlier models where there is 60/90 thousands gap at idle, but nothing for the 54 EBU carb.
Any ideas??

Thank You

fordor41 · 07-14-2022, 10:17 PM

I would think .060-.090" gap would not do anything. are you sure it isn't compress the dashpot plunger 30-90 at idle?

KULTULZ · 07-15-2022, 02:46 AM

The adjustment procedure is discussed on PG 80, - 2. LINKAGE ADJ - a. IDLE ADJ

It is included in the LINKAGE ADJ in the TRANS SECT as the linkage has to be adjusted for proper TRANS OPERATION.

Proper idle adj is established first without the dash-pot engaged and once proper idle is achieved, the dash-pot adj as not to interfere with basic curb idle RPM.

1954 SHOP MANUAL SUPPLEMENT - JAN 54

KULTULZ · 07-15-2022, 03:58 AM

Quote:

Originally Posted by fordor41

I would think .060-.090" gap would not do anything. are you sure it isn't compress the dashpot plunger 30-90 at idle?

Correct.

Proper curb idle is achieved first, then dash-pot and then TV LINKAGE.

ILL incl below. It shows a FORD 4100 but the principle is the same -

jhaase · 07-17-2022, 06:43 PM

On page 80 of my Jan 54 supplement, it discusses power steering.

KULTULZ · 07-18-2022, 01:25 AM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by jhaase

On page 80 of my Jan 54 supplement, it discusses power steering.

Yes it does as I typed the incorrect PAGE NO.

It should be PAGE 60 ...

jhaase · 07-18-2022, 08:06 PM

Thank You!!

KULTULZ · 07-18-2022, 08:17 PM

And THANX! for not cussing me out.

CRS is a b!tch ...

07-14-2022, 08:31 PM	#1
jhaase Member Join Date: Dec 2021 Location: Wisconsin Posts: 32	Ford carb dashpot, I have a 1954 Ford Crestline with a 239 & Ford EBU carb, I looked in my service manual supplement & no where can I find how to adjust the right-side carb dashpot. I found the adjustment for the earlier models where there is 60/90 thousands gap at idle, but nothing for the 54 EBU carb. Any ideas?? Thank You

07-14-2022, 10:17 PM	#2
fordor41 Senior Member Join Date: Oct 2011 Location: elmira,ny Posts: 1,517	Re: Ford carb dashpot, I would think .060-.090" gap would not do anything. are you sure it isn't compress the dashpot plunger 30-90 at idle?

07-15-2022, 02:46 AM	#3
KULTULZ Senior Member Join Date: Aug 2012 Location: IN A 'GALAXIE' FAR FAR AWAY Posts: 6,475	Re: Ford carb dashpot, The adjustment procedure is discussed on PG 80, - 2. LINKAGE ADJ - a. IDLE ADJ It is included in the LINKAGE ADJ in the TRANS SECT as the linkage has to be adjusted for proper TRANS OPERATION. Proper idle adj is established first without the dash-pot engaged and once proper idle is achieved, the dash-pot adj as not to interfere with basic curb idle RPM. 1954 SHOP MANUAL SUPPLEMENT - JAN 54 __________________ *** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ... DIAGNOSED CDO** - (OCD In Correct Alphabetical Order)

07-17-2022, 06:43 PM	#5
jhaase Member Join Date: Dec 2021 Location: Wisconsin Posts: 32	Re: Ford carb dashpot, On page 80 of my Jan 54 supplement, it discusses power steering.

07-18-2022, 08:06 PM	#7
jhaase Member Join Date: Dec 2021 Location: Wisconsin Posts: 32	Re: Ford carb dashpot, Thank You!!

07-18-2022, 08:17 PM	#8
KULTULZ Senior Member Join Date: Aug 2012 Location: IN A 'GALAXIE' FAR FAR AWAY Posts: 6,475	Re: Ford carb dashpot, And THANX! for not cussing me out. CRS is a b!tch ... __________________ *** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ... DIAGNOSED CDO** - (OCD In Correct Alphabetical Order)