|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-25-2017, 11:29 PM | #1 |
Senior Member
Join Date: Dec 2010
Location: Verdi, Nevada
Posts: 166
|
30 Briggs Fordor Seat adjuster
I just accumulated an early 30 Briggs 165-D Fordor. Car is in remarkable original condition with original upholstery having been in storage for 50+ years. Found the front seat adjuster mechanism had been removed in its deep dark past. The receiver brackets were on the seat frame but the floor rails were missing, Bert's in Denver (Steve) came up with the floor rails, but I am still missing the adjuster bracket that mounts on the seat frame (it is narrower and mounts different than the one used on the Coupes and later Fordors. Has anyone out there had any experience dealing with this issue. I have been unable to find anything on this particular configuration .. Seems there is no consistency on how these Briggs's bodied were assembled. Finding out I have a lot to learn. Any help appreciated
Thanks Rick Jensen [email protected] |
07-26-2017, 06:25 AM | #2 |
Senior Member
Join Date: Aug 2012
Location: Adrian , Mich.
Posts: 386
|
Re: 30 Briggs Fordor Seat adjuster
Sponsored Links (Register now to hide all advertisements)
https://www.fordmodela.com/restoration/disassembly/ |
Sponsored Links (Register now to hide all advertisements) |
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|