Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 11-03-2013, 11:36 AM   #1
Fred Hanks
Member
 
Join Date: Sep 2013
Posts: 35
Question W/S stainless steel trim

Is there an easy way to install the trim into the w/s rubber gasket on my "49 F-1 ???
Fred Hanks is offline   Reply With Quote
Old 11-03-2013, 11:48 AM   #2
oldblue
Member
 
oldblue's Avatar
 
Join Date: Jul 2011
Location: Edmonton,Alberta/Iffley,Saskatchewan
Posts: 63
Default Re: W/S stainless steel trim

Well I'm lucky , I have a Glass shop 2 blocks away and the manager and assistant manager have worked together for 32 years and will come to my home shop to help with install problems . The point is depending on where you live check around . If you want to do it yourself use lots of soap and water and tap in slowly with a soft rubber mallet .
__________________
49 Mercury M68 Pickup
oldblue is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 11-03-2013, 11:46 PM   #3
fordor41
Senior Member
 
fordor41's Avatar
 
Join Date: Oct 2011
Location: elmira,ny
Posts: 1,517
Default Re: W/S stainless steel trim

Sponsored Links (Register now to hide all advertisements)
I assume the gasket is similar to '41-'48 Fords. Make sure the edge that gets inserted into the rubber is rust/dirt free. I fought the trim on my '41, with soapy water. No luck. I tried smearing grease on the S.S edge and It slipped right in. Worked from the center bottom around to the top
fordor41 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:22 PM.