The Ford Barn

53OlderThanMe · 10-20-2013, 02:34 PM

I got this with my 31 Roadster unfortunately it seems to be for a 28/29.

Based on what I have seen the original windshield are 14.5" tall on ends, this one is 11.5" tall on ends. It is 9.5 inches tall in the center, 42 5/8 inches across the top and 41 inches across the bottom.

It may be an original but I have no way of knowing. Fair amount of rust on the frame and some separation of glass layers visible in the corners, hard to photograph that. Certainly not for a show car without some work but decent enough for a driver IMO.

Includes the mounting hardware shown. Price is plus shipping, I would trade for a 30/31 windshield on the off chance you were in the opposite situation or a Model A frame, early spindles, juice brakes, 39 gear set or ?

Photos not loading, hosted here: http://sdrv.ms/1a2j2go

53OlderThanMe · 10-23-2013, 08:01 AM

Bump, some trade offers only...

53OlderThanMe · 10-27-2013, 08:00 PM

Bump, free shipping to lower 48 for Ford Barn members, $300 Shipped!

JMKnight · 10-28-2013, 11:42 AM

PM Sent. I have some 40 backing plates for partial trade if interested.

I also have toploader gear sets.

53OlderThanMe · 10-28-2013, 03:55 PM

Pending trade

53OlderThanMe · 10-29-2013, 09:09 PM

Sponsored Links (Register now to hide all advertisements)

Sold

10-20-2013, 02:34 PM	#1
53OlderThanMe Member Join Date: Aug 2013 Location: Texas Posts: 93	1928 1929 Model A Roadster Windshield 3" Chop City: Dallas State: TX Price: 300 I got this with my 31 Roadster unfortunately it seems to be for a 28/29. Based on what I have seen the original windshield are 14.5" tall on ends, this one is 11.5" tall on ends. It is 9.5 inches tall in the center, 42 5/8 inches across the top and 41 inches across the bottom. It may be an original but I have no way of knowing. Fair amount of rust on the frame and some separation of glass layers visible in the corners, hard to photograph that. Certainly not for a show car without some work but decent enough for a driver IMO. Includes the mounting hardware shown. Price is plus shipping, I would trade for a 30/31 windshield on the off chance you were in the opposite situation or a Model A frame, early spindles, juice brakes, 39 gear set or ? Photos not loading, hosted here: http://sdrv.ms/1a2j2go Last edited by 53OlderThanMe; 10-27-2013 at 07:59 PM.

10-23-2013, 08:01 AM	#2
53OlderThanMe Member Join Date: Aug 2013 Location: Texas Posts: 93	Re: 1928 1929 Model A Roadster Windshield 3" Chop Bump, some trade offers only...

10-27-2013, 08:00 PM	#3
53OlderThanMe Member Join Date: Aug 2013 Location: Texas Posts: 93	Re: 1928 1929 Model A Roadster Windshield 3" Chop Bump, free shipping to lower 48 for Ford Barn members, $300 Shipped!

10-28-2013, 11:42 AM	#4
JMKnight Member Join Date: Jun 2011 Location: Bountiful, UT Posts: 66	Re: 1928 1929 Model A Roadster Windshield 3" Chop PM Sent. I have some 40 backing plates for partial trade if interested. I also have toploader gear sets.

10-28-2013, 03:55 PM	#5
53OlderThanMe Member Join Date: Aug 2013 Location: Texas Posts: 93	Re: 1928 1929 Model A Roadster Windshield 3" Chop Pending trade

10-29-2013, 09:09 PM	#6
53OlderThanMe Member Join Date: Aug 2013 Location: Texas Posts: 93	Re: 1928 1929 Model A Roadster Windshield 3" Chop Sponsored Links (Register now to hide all advertisements) Sold