The Ford Barn

1crosscut · 11-23-2017, 06:33 PM

In need the section of pipe from the manifold to the muffler. If you have a muffler that has gone kaput but this piece is still good I would like to use it for an engine test stand that I am building. I will put a small clamp on muffler on that piece.
Or if you have a muffler that has perhaps a few pin holes in it that can be welded up or the tail pipe is shot I would be interested in it. Tail pipe can be cut off just past the muffler to save on shipping.
(402) 326-5616

1crosscut · 11-28-2017, 01:04 PM

Sponsored Links (Register now to hide all advertisements)

Found what I needed.

11-23-2017, 06:33 PM	#1
1crosscut Senior Member Join Date: Feb 2011 Location: Lincoln, Nebraska Posts: 1,909	Front section of exhaust pipe City: Lincoln State: Nebraska In need the section of pipe from the manifold to the muffler. If you have a muffler that has gone kaput but this piece is still good I would like to use it for an engine test stand that I am building. I will put a small clamp on muffler on that piece. Or if you have a muffler that has perhaps a few pin holes in it that can be welded up or the tail pipe is shot I would be interested in it. Tail pipe can be cut off just past the muffler to save on shipping. (402) 326-5616 __________________ Dave / Lincoln Nebraska Last edited by 1crosscut; 11-23-2017 at 10:07 PM.

11-28-2017, 01:04 PM	#2
1crosscut Senior Member Join Date: Feb 2011 Location: Lincoln, Nebraska Posts: 1,909	Re: Front section of exhaust pipe Sponsored Links (Register now to hide all advertisements) Found what I needed. __________________ Dave / Lincoln Nebraska