10-12-2017, 08:36 PM | #1 |
Member
Join Date: Jan 2011
Posts: 34
|
Timing Marks?
Hello folks. Let me start by adding this is my first adventure in A land.
I am getting started on my miller ohv conversion and I have a 350 cam from Stipe I will be installing. My question is, is the timing pin just used for finding TDC. If I want to pull the cam, should I line up the pin mark in the cam gear with the mark on the crank then pull cam? Also recommendations on a good engine overhaul manual would be appreciated. |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|