The Ford Barn

movingviolation · 12-29-2021, 05:58 PM

Hey folks

In the process of building a stroked flathead with a 4-71 blower. Anyone out there with experience in these?? If so what cam shaft options are being used?

Rotating assembly is the 4.25 with Scat Hbeams and Scat Crank. Offenhauser heads, and Mooneyham 4-71 set up..

Currently looking at the custom grind H&H flatheads has..

Thanks

paul2748 · 12-29-2021, 09:16 PM

Sponsored Links (Register now to hide all advertisements)

Post this in the Early V8 forum. This is the wrong place

12-29-2021, 05:58 PM	#1
movingviolation Junior Member Join Date: Dec 2021 Posts: 12	Cam for 4-71 Flathead????? Hey folks In the process of building a stroked flathead with a 4-71 blower. Anyone out there with experience in these?? If so what cam shaft options are being used? Rotating assembly is the 4.25 with Scat Hbeams and Scat Crank. Offenhauser heads, and Mooneyham 4-71 set up.. Currently looking at the custom grind H&H flatheads has.. Thanks

12-29-2021, 09:16 PM	#2
paul2748 Senior Member Join Date: May 2010 Location: Midland Park, NJ Posts: 3,979	Re: Cam for 4-71 Flathead????? Sponsored Links (Register now to hide all advertisements) Post this in the Early V8 forum. This is the wrong place __________________ 48 Ford Conv 56 Tbird 54 Ford Victoria