Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 05-22-2017, 11:04 AM   #1
coatings03
Member
 
Join Date: May 2013
Location: Seal beach,CA
Posts: 68
Default popping noise

Hello everyone,
Just recently finished my 29 speedster. I have noticed a continuous popping noise then the engine dies. I have a model B distributor and a tilitson carb. Having trouble finding the problem could use some help.

Thanks,
Jim M
coatings03 is offline   Reply With Quote
Old 05-22-2017, 12:51 PM   #2
Will N
Senior Member
 
Will N's Avatar
 
Join Date: Jul 2010
Location: Pennsylvania
Posts: 1,101
Default Re: popping noise

Could be fuel starvation. Check the easiest things first. Is the gas cap vent working? If so, check for clogs in the gas line.
Will N is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 05-22-2017, 01:10 PM   #3
Jacksonlll
Senior Member
 
Jacksonlll's Avatar
 
Join Date: Jul 2012
Location: Michigan-- Member of Oakleaf of MARC
Posts: 1,686
Send a message via ICQ to Jacksonlll
Default Re: popping noise

Next time it dies, stick your finger in the carb near the choke blade and see if it is wet with gas. Bet it comes out dry.
Jacksonlll is offline   Reply With Quote
Old 05-22-2017, 02:40 PM   #4
coatings03
Member
 
Join Date: May 2013
Location: Seal beach,CA
Posts: 68
Default Re: popping noise

When the engine died, checked choke blade. Dry as a bone. Removed the gas line going to carb at first a trickle then stops, then flows more steady.
Something in the tank? Newly lined tank?
coatings03 is offline   Reply With Quote
Old 05-22-2017, 04:12 PM   #5
1931 flamingo
Senior Member
 
1931 flamingo's Avatar
 
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,389
Default Re: popping noise

What was used to "line" the tank?? Was it Ethanol proof?? Do you have the "pencil" filter installed in the tank??
Paul in CT
1931 flamingo is offline   Reply With Quote
Old 05-22-2017, 07:29 PM   #6
coatings03
Member
 
Join Date: May 2013
Location: Seal beach,CA
Posts: 68
Default Re: popping noise

Sponsored Links (Register now to hide all advertisements)
I removed a small piece in the gas line near the sediment glass bowl. checked gas flow slow at first. turned the choke adjustment 3/4 to the left. It runs good now. adjusted idle down.
I think it's ok now. The pencil filter was not installed. I better install it.

thank you for your help/ could be frustrating.
coatings03 is offline   Reply With Quote
Old 05-22-2017, 07:54 PM   #7
jm29henry
Senior Member
 
jm29henry's Avatar
 
Join Date: Sep 2010
Location: michigan
Posts: 1,126
Default Re: popping noise

That pencil filter works well
jm29henry is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:51 AM.