|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-14-2023, 09:54 PM | #1 |
Senior Member
Join Date: Nov 2014
Location: girard,il
Posts: 123
|
46 mercury clutch and brake peddle springs
does anyone have pictures of the brake and clutch peddle spring location from pin #7533toother end of spring on a 1946 mercury or ford that you can share. any information will help. thank you
|
01-14-2023, 10:19 PM | #2 |
Senior Member
Join Date: May 2010
Posts: 432
|
Re: 46 mercury clutch and brake peddle springs
I’m restoring a ‘46 Merc not too far from you in St. Louis. I can take photos tomorrow and send to you. Never been successful posting photos, so I might need to email or text them to you.
Bruce Williams |
Sponsored Links (Register now to hide all advertisements) |
|
01-14-2023, 10:27 PM | #3 |
Senior Member
Join Date: Nov 2014
Location: girard,il
Posts: 123
|
Re: 46 mercury clutch and brake peddle springs
bruce,i am doing the same to 46 merc.will be looking foward to tomorrow.thank you,john
|
01-14-2023, 11:28 PM | #4 |
Senior Member
Join Date: Jan 2011
Location: Albion, PA
Posts: 708
|
Re: 46 mercury clutch and brake peddle springs
The spring P/N is 11A 7523 for the clutch spring and is 6.3 inches long. Hooks from the pivot pin to a hole in the brace coming from the frame.
|
01-15-2023, 07:38 AM | #5 |
Senior Member
Join Date: May 2010
Posts: 4,743
|
Re: 46 mercury clutch and brake peddle springs
11A-7523 for the clutch pedal, 7.3" long and 99A-7523 for the brake, 7.6" long Not sure about mounting the clutch spring may mount on a small triangular shaped bracket mounted to one of the transmission mounting bolts??
|
01-15-2023, 10:22 AM | #6 |
Senior Member
Join Date: Jan 2011
Location: Albion, PA
Posts: 708
|
Re: 46 mercury clutch and brake peddle springs
Sponsored Links (Register now to hide all advertisements)
|
01-15-2023, 10:57 AM | #7 |
Senior Member
Join Date: May 2010
Posts: 432
|
Re: 46 mercury clutch and brake peddle springs
John… sent you a pm to share photos. Sorry I couldn’t get them to post correctly.
Bruce |
01-18-2023, 01:04 PM | #8 |
Senior Member
Join Date: Nov 2014
Location: girard,il
Posts: 123
|
Re: 46 mercury clutch and brake peddle springs
hey guys thank you all for the great info and pictures,bruce sent me some pictures showing clutch spring from pivot pin to hole in lower brace below the master cyl.the brake spring goes from pivot pin to bracket (had to make one)attached to the last bolt on the oil pan just above the clutch equalizer shaft.just wanted to share this info with you all.thanks again, john
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|