The Ford Barn

Hicktick · 07-14-2018, 01:16 PM

What is the best book to buy a newbie that wants to rebuild a Zenith .,

What would you buy ., thanks ,.
,.
,.

Tacoma Bob · 07-14-2018, 02:29 PM

modela.org the best info out there IMHO. Plenty of good sound instruction with no B/S. Be prepared to spend some time. I actually printed the whole thing and have it in a 3 ring binder.

1928Mik · 07-14-2018, 02:40 PM

Yes, ModelA.org worked for me also. I was familiar with the configuration, so when I went to rebuild the gummed up and dried out one I inherited on my car due to lengthy storage, I found all the info I needed online.

Gary WA · 07-14-2018, 05:36 PM

Tom Endy has excellant rebuild process!

Hicktick · 07-15-2018, 07:39 PM

Thanks I will try to convert it to print .

Sparky · 07-16-2018, 10:21 AM

Sponsored Links (Register now to hide all advertisements)

I found the book "RESTORING THE MODEL "A" & "B" CARBURETOR THE "REX" REHEIS WAY" to be helpful; most of the parts suppliers will have it.

mfarley · 07-18-2018, 03:13 PM

Flow tested jets from Renner's Corner. Just sayin'...

07-14-2018, 01:16 PM	#1
Hicktick Senior Member Join Date: Aug 2011 Location: Hickory Tavern , SC Posts: 422	Rebuilding a Zenith What is the best book to buy a newbie that wants to rebuild a Zenith ., What would you buy ., thanks ,. ,. ,. __________________ Sometimes I want to say ,,You should have bought a Shay.

07-14-2018, 02:29 PM	#2
Tacoma Bob Senior Member Join Date: May 2010 Location: Tacoma, WA Posts: 1,025	Re: Rebuilding a Zenith modela.org the best info out there IMHO. Plenty of good sound instruction with no B/S. Be prepared to spend some time. I actually printed the whole thing and have it in a 3 ring binder.

07-14-2018, 02:40 PM	#3
1928Mik Senior Member Join Date: Feb 2017 Location: Zanesville Ohio USA Posts: 267	Re: Rebuilding a Zenith Yes, ModelA.org worked for me also. I was familiar with the configuration, so when I went to rebuild the gummed up and dried out one I inherited on my car due to lengthy storage, I found all the info I needed online. __________________ 1928 Niagara Blue Phaeton 1972 Olds 442 Convertible 1979 MGB -Life's Too Short To Drive Boring Cars-

07-14-2018, 05:36 PM	#4
Gary WA Senior Member Join Date: May 2010 Location: Clinton,WA/Whidbey Island Posts: 4,098	Re: Rebuilding a Zenith Tom Endy has excellant rebuild process! __________________ www.whidbeymodelaclub.com

07-15-2018, 07:39 PM	#5
Hicktick Senior Member Join Date: Aug 2011 Location: Hickory Tavern , SC Posts: 422	Re: Rebuilding a Zenith Thanks I will try to convert it to print . __________________ Sometimes I want to say ,,You should have bought a Shay.

07-16-2018, 10:21 AM	#6
Sparky Senior Member Join Date: May 2010 Location: Rhode Island Posts: 649	Re: Rebuilding a Zenith Sponsored Links (Register now to hide all advertisements) I found the book "RESTORING THE MODEL "A" & "B" CARBURETOR THE "REX" REHEIS WAY" to be helpful; most of the parts suppliers will have it.

07-18-2018, 03:13 PM	#7
mfarley Member Join Date: Jun 2017 Location: Bismarck, ND Posts: 84	Re: Rebuilding a Zenith Flow tested jets from Renner's Corner. Just sayin'...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode