Ford Holley Carb 94 gaskets

[Randy1944]

I am looking for correct gaskets for three 94 carbs that I have. I bgt one kit from Carpenters and a couple kits from Speedway. It appears their gaskets are “generic” and the ones for body flange are not correct and do not fit. Any ideas for correct gaskets? Thanks

[Bursonaw]

Vintage Speed has everything you need. Also has some
U-tube instructional videos to help.

http://vintagespeed.com


Sent from my iPad using Tapatalk

[Deuce Man]

Before you put in those new gaskets, make sure all surfaces are flat. Charlie at Vintage Speed has a fixture on his vertical mill that trues up all gasket surfaces that have been warped over the years from over tightening. He also bushes and re reams throttle shaft bores, makes a big difference. Rich

[tubman]

Be very careful when dealing with "Charlie" at Vintage Speed. He does have a lot of hard to find parts, but his customer service sucks. I ordered a pair of jets from him, and they arrived as used and in the incorrect sizes. When I called and asked about the problem, they blew me off. Long story short, if they have what you want, they can be great; if not, "Caveat Emptor".

I'd go to "Charlieny" or "Scialia" on here before dealing with "Vintage Speed".

[Randy1944]

Thanks to everyone for the info.

[Charlie ny]

Sponsored Links (Register now to hide all advertisements)

Rich,

Please do not confuse Charlie Price at Vintage Speed with Charlie ny.
I'm Charlie ny and I'm the guy that does the machining on 94's. I value my reputation.
Thank you,
Charles Schwendler
Charlie ny

[scicala]

I've never seen any kits for Holley 94's that had incorrect gaskets. Are you sure you don't have kit's for a Stromberg 97 or vise versa ?


Sal

[grumppyoldman]

NAPA has repair kits for the 94 carb. Al

[Deuce Man]

Charlie NY, Charlie Price re machines the gasket surfaces too, I have watched him do it on my carbs. Rich

[donald1950]

Daytona Parts in Florida is a great sourse for 94 gaskets.

[Randy1944]

Vintage speed came thru with the correct fitting gaskets. Many thanks to all.

[ford38v8]

Originally Posted by Deuce Man

Charlie NY, Charlie Price re machines the gasket surfaces too, I have watched him do it on my carbs. Rich

Not to detract from anyone's workmanship, but I do believe some folks get a bit too excited over hearing the word "machining". Shade tree mechanics have been doing very acceptable "machining" work by hand since the invention of dirty fingernails.

[chap52]

In the back of our cave we had a flat surface, a piece of glass, a felt tip marker and a sheet of emery paper. We referred to our shade tree as "the veranda". lol Chap