The Ford Barn

harleyman · 07-04-2018, 06:34 PM

I'd appreciate any suggestions for an aftermarket steering column that would allow me to mate my '36 banjo steering wheel to a Flaming River Vega steering box. Just want a basic column, no tilt, etc. Plan to have old school type signal light lever clamped on the column.

Steve in Denver · 07-04-2018, 08:04 PM

What front end are you using? If something like a '39 with hydraulics, you might think of using a '37 steering column.

Charlie Stephens · 07-04-2018, 09:37 PM

Sponsored Links (Register now to hide all advertisements)

You posted in a forum of fordbarn that is intended for questions to the editors. You might have better luck in the main forum. Even better, post on HAMB where they deal with modified cars: https://www.jalopyjournal.com/forum/...ssage-board.5/

Charlie Stepehns

07-04-2018, 06:34 PM	#1
harleyman Junior Member Join Date: Apr 2012 Location: Surrey, BC Posts: 3	Steering column for '36 banjo wheel I'd appreciate any suggestions for an aftermarket steering column that would allow me to mate my '36 banjo steering wheel to a Flaming River Vega steering box. Just want a basic column, no tilt, etc. Plan to have old school type signal light lever clamped on the column.

07-04-2018, 08:04 PM	#2
Steve in Denver Senior Member Join Date: May 2017 Posts: 566	Re: Steering column for '36 banjo wheel What front end are you using? If something like a '39 with hydraulics, you might think of using a '37 steering column.

07-04-2018, 09:37 PM	#3
Charlie Stephens Senior Member Join Date: May 2010 Location: Southern California Posts: 7,030	Re: Steering column for '36 banjo wheel Sponsored Links (Register now to hide all advertisements) You posted in a forum of fordbarn that is intended for questions to the editors. You might have better luck in the main forum. Even better, post on HAMB where they deal with modified cars: https://www.jalopyjournal.com/forum/...ssage-board.5/ Charlie Stepehns