|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-18-2020, 03:58 PM | #1 |
Senior Member
Join Date: Mar 2011
Location: Broomall PA 19008
Posts: 2,262
|
Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
I am fabricating a part for a 1933 1934 Ford. Fits all body styles. Very tough to find in good condition. I am half way there. Would anyone like to guess what it is going to be. Thought everyone would like to see how a piece of round stock transforms into a part. I will do a whole series of photos of how it is made when I complete the part.
Bill Monzo |
01-18-2020, 04:08 PM | #2 |
Senior Member
Join Date: Feb 2014
Location: clear lake, iowa
Posts: 157
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
engine stabilizer rod bolt
|
Sponsored Links (Register now to hide all advertisements) |
|
01-18-2020, 04:20 PM | #3 |
Senior Member
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,006
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
Not so certain you are correct. If that were the part, surely Bill would have cut the threads prior to removing the piece from the lathe.
__________________
"I can explain it for you. However, I can't understand it for you". |
01-18-2020, 04:22 PM | #4 |
Senior Member
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
This would be my guess...
I just got 500 of them back from the plater last week. Engine steady rod bolts. These were done on a CNC, and the squares broached in. Sent from my iPhone using Tapatalk |
01-18-2020, 04:23 PM | #5 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,942
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
A stanchion pin? ( I really don't know. Just made that up.)
|
01-18-2020, 04:37 PM | #6 |
Senior Member
Join Date: Mar 2011
Location: Broomall PA 19008
Posts: 2,262
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
Sponsored Links (Register now to hide all advertisements)
Great to see you made them. I won't finish mine. I will just buy a pair from you for my 34 Ford. Everything you sell is fantastic. Bill monzo |
01-18-2020, 04:40 PM | #7 |
Senior Member
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
Bill I’d love to see you finish yours, unlike me who pays a local CNC shop to make stuff I thoroughly enjoy your posts and the passion you put into making things and anything you make is first class and we all enjoy seeing how you make these items by hand on your own lathe. Your a true craftsman and your products show your passion. I’m curious how you would put the square drive into them. I watched them broach these and that was some sketchy business.
|
01-18-2020, 04:46 PM | #8 |
Senior Member
Join Date: May 2010
Location: Powell, TN
Posts: 2,509
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
Grease cup for the throw out bearing?
|
01-18-2020, 05:02 PM | #9 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,431
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
It certainly could be repurposed for one of those.
|
01-18-2020, 05:13 PM | #10 | |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,113
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
Quote:
Hopefully he was gonna "roll" the threads rather than cut them. DD |
|
01-18-2020, 06:38 PM | #11 | |
Senior Member
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,006
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
Quote:
I suppose there's more than one way to make these. Me? I'd have made the threaded part a little longer than required and cut the threads while the stock was still in the lathe. Then, after the threads were cut, Id simply cut off the "extra" material on the end to spec. Pull out the stock, turn it around and cut the head to spec. Pretty easy. Milling that square indent in the head would have been only slightly more difficult. I'd have done that prior to any lathe work.
__________________
"I can explain it for you. However, I can't understand it for you". |
|
01-18-2020, 07:08 PM | #12 |
Senior Member
Join Date: Oct 2011
Location: Shelton, WA
Posts: 3,800
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
When did those bolts go from having a square hole in the end to being a hex head? I have NOS ones that have hex heads and the tapered lock washers.
|
01-18-2020, 07:29 PM | #13 |
Senior Member
Join Date: Jan 2012
Posts: 247
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
I'd like to see someone mill a square dead end hole.
|
01-18-2020, 07:54 PM | #14 |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,113
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
How's about turning a cube (in a cube) on a lathe? Link below! DD https://www.youtube.com/watch?v=W5bymJkbF50 |
01-18-2020, 08:01 PM | #15 |
Senior Member
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,006
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
I'd done it numerous times. There is of course a very small radius in each corner.
There's also a mill head that will actually cut square corners. I'd only used that a couple of times. Never did quite understand the engineering behind that but man, it was cool !
__________________
"I can explain it for you. However, I can't understand it for you". |
01-18-2020, 09:33 PM | #16 |
Senior Member
Join Date: Mar 2011
Location: Broomall PA 19008
Posts: 2,262
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
The 1933 1934 Ford engine steady rod bolt uses a nut and lock washer on the under side to secure it unlike the later ones in which the bolt threads directly into the engine steady rod itself. So because it has a nut there is no need to roll the threads. Standard threads will work just fine. See my photos of a rusty but original pair of bolts. Before I remove my part from a lathe, if there is to be more work done on it I mark it as to the depth and jaw number so it can be put right back into the lathe at the same position. My lathe has a run out of less than a thousands so easy to put back just right. Machinist all do things differently. The order of operation may vary but as long as the end result is right that is all that matters. I use a spigot to hold my work and cut it off at the end. It is always my method of holding the work during all the operations. I may mill the square hole in the head of the bolt but as already stated there may be a slight radius in the corners. There is another way and that is a rotary broach but I don't have one. I used one at the shop I worked years ago. I do have a fixture that this will thread into to hold it while it is being milled. Please look at my last two photos of the Roadster windshield stud I made on the lathe. I was able to obtain perfection by my order of operation and please look the threads as they look and operate perfectly.
Bill |
01-19-2020, 09:26 AM | #17 | |
Senior Member
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,006
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
Quote:
__________________
"I can explain it for you. However, I can't understand it for you". |
|
01-19-2020, 11:16 AM | #18 |
Senior Member
Join Date: Jan 2011
Location: sw minnesota
Posts: 4,574
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
while i can certainly admire the precision work that bill does, and the great efforts by many to do exact restorations, i do really like the allen head screw from fastinal for this application. its so much easier, and its under the floor where it cant be seen
|
01-19-2020, 12:07 PM | #19 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,431
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
Torx are the big thing now days. Just be glad it wasn't GM or it might have been a clutch head.
|
01-19-2020, 02:34 PM | #20 | |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,113
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
Quote:
The very first TORX I ever encountered was on a '79 Corvette tail light lens. I still have the Torx driver that I went out and bought from Snap-On. Haven't seen a clutch head on a GM since the '50s. DD |
|
01-19-2020, 02:42 PM | #21 |
Senior Member
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,006
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
First I'd encountered was '75 Buick 231CID six cylinder. The left - front intake bolt. Had to be a Torx as the distributor was there - not enough clearance for a hex head bolt.
__________________
"I can explain it for you. However, I can't understand it for you". |
01-19-2020, 03:07 PM | #22 | |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,113
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
Quote:
When I first began to notice that Torx fasteners were becoming more prevalent (I still hadn't graduated beyond COMPLETE dumbass yet), I figured the phenomenon to be a conspiracy with the tool companies to sell more tools. At the time, I figured that an ALLEN cap screw was every bit as good. But it finally became apparent that you can apply much more torque to a similar-sized Torx fastener vs. an ALLEN head fastener....without rounding out the opening for the tool. It's pretty darn easy to round-out an ALLEN slot. I have never rounded-out a Torx slot. Result of the simple physics of SHAPE. DD |
|
Sponsored Links (Register now to hide all advertisements) |
|
01-19-2020, 03:18 PM | #23 |
Senior Member
Join Date: May 2010
Location: Qld, Australia
Posts: 4,215
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
Whats a clutch head
Lawrie |
01-19-2020, 03:32 PM | #24 |
Senior Member
Join Date: May 2010
Posts: 2,173
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
A screwdriver for this slot. Jack E/NJ
|
01-19-2020, 03:58 PM | #25 |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,113
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
Hey Lawrie...Something like these. They're about one of the dumbest fasteners ever invented. I know that GM (and possibly others) used them in some really dumb spots in the '50s. Almost impossible to remove once "rusted-in" real good. DD |
01-20-2020, 10:51 AM | #26 | |
Senior Member
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 3,955
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
Sponsored Links (Register now to hide all advertisements)
Quote:
|
|
01-20-2020, 03:21 PM | #27 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
Lawrie,
And then there is the Canadian invention, a Robertson head which which has a square depression, which you may have encountered on a Model A down under. Ford of Canada stopped using them with the '32 models. They're a great fastener for places where you do not want the screw driver to ever slip out of a slot, such as attaching the molding retaining the roof insert fabric on a pre-'37 adjacent to a freshly-painted roof. They are popular today with those who install deck slats; the entire boardwalk in Miami Beach is attached with Roberson screws. |
01-20-2020, 04:05 PM | #28 | |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,113
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
Quote:
Which reminds me of another "penny-pinching" Henry Ford practice. How many of y'all have ever wondered why you see no "Phillips-head" fasteners on these older Fords? I've been given to understand that Henry refused to pay for the rights to use the (then) new cross-point design found on the heads of fasteners. Same reason we didn't have "Bendix" type brakes for so long on Fords. Henry did realize that the big, heavy Lincolns couldn't get by without the self-energizing Bendix design, so he paid-up for those. DD |
|
01-21-2020, 02:53 PM | #29 |
Senior Member
Join Date: Sep 2013
Posts: 3,005
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
Just received two of these. Beautifully made...Way to go Mike!!!!
I already have originals on my 33 model B but one I had to rework because someone way back when messed up the square socket. Used the thinnest dremel sanding stand they had to make the square true again. |
01-22-2020, 12:07 PM | #30 |
Senior Member
Join Date: Oct 2016
Location: harpursville ny
Posts: 1,040
|
Re: Part For A 34 Ford Half Way Made Anyone like to Guess What It Is
And I thought these were called shithouse screws as they use them on the stalls to prevent thieves from taking them. Must be a good market for toilet stalls.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|