|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-08-2020, 07:10 AM | #1 |
Member
Join Date: Apr 2014
Posts: 84
|
1931 Fenders on RPU
Trying to put a RPU Together with fenders and running boards .I do have a set
of 31s off a Sedan. Or what would be the correct ones. Thanks |
02-08-2020, 08:20 AM | #2 |
Senior Member
Join Date: May 2010
Location: Van, Texas
Posts: 1,122
|
Re: 1931 Fenders on RPU
assuming your RPU ia a 30 or 31, the 31 fenders off a sedan will not fit. You wil need fenders off a 30 or 31 RPU, PU, Roadster or Coupe
|
Sponsored Links (Register now to hide all advertisements) |
|
02-08-2020, 08:28 AM | #3 |
Senior Member
Join Date: May 2010
Location: Epping N.H.
Posts: 2,989
|
Re: 1931 Fenders on RPU
The fronts will fit,as long as your pickup is also a 30-31.The splash aprons are different between the 30-31,but if used as a whole they will fit just fine.The rears are different.The difference is night and day on the rears.
|
02-08-2020, 10:56 AM | #4 |
Member
Join Date: Apr 2014
Posts: 84
|
Re: 1931 Fenders on RPU
Thanks for the info .. Back to the drawing board..
|
02-08-2020, 11:07 AM | #5 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: 1931 Fenders on RPU
The rear pickup rear fenders are wider than sedan fenders .
|
02-08-2020, 01:56 PM | #6 | |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,032
|
Re: 1931 Fenders on RPU
Sponsored Links (Register now to hide all advertisements)
Quote:
Charlie Stephens |
|
02-09-2020, 08:27 AM | #7 |
Member
Join Date: Apr 2014
Posts: 84
|
Re: 1931 Fenders on RPU
So I am good up to the end of the splash aprons with the 31 body?
Keith True mentioned the splash aprons will work if used as a whole. What does that mean? |
02-09-2020, 09:40 AM | #8 |
Senior Member
Join Date: Jan 2018
Location: Frenchtown Township, MI
Posts: 959
|
Re: 1931 Fenders on RPU
Keith means if you have the '31 front fender and its long apron or the '30 front fender with its short apron that makes either whole. FWIW the '30 front fender has a short apron "tip" that's spot welded into the fender and therefore uses a separate short running board apron. The '31 doesn't have that "tip" so therefore the longer apron nests in that void.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|