|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-25-2019, 05:46 PM | #1 |
Senior Member
Join Date: Nov 2010
Location: Indiana
Posts: 251
|
Door Fit Problem
Raised the front of the body a bit to better align the hood. Added a couple rubber shims on each side. Hood is great.
Both doors(coupe) worked well before I did this. The passenger still works well but the driver door seems high on the hinge end and low on the latch end. The door will close when I lift it a bit and close it with force. I suspect I did this misalignment when I shimmed the front of the body. Looking at the latch, the door is a good quarter in above where it was before. I would like to keep my front body shims in place but maybe not. I would prefer to adjust the door a bit. Any suggestions on best way forward? Thanks. |
02-25-2019, 06:15 PM | #2 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,156
|
Re: Door Fit Problem
Sponsored Links (Register now to hide all advertisements)
|
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|