|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-19-2020, 12:58 PM | #1 |
Junior Member
Join Date: Mar 2018
Location: Wisconsin
Posts: 5
|
1934 Victoria project
City:
Walworth
State:
Wi
Price:
12345
Putting feelers out there. I’ve been in the process of dismantling the car over the past few years. The car is complete with all parts. I just don’t have the right shop to do this right, so most of it will need to be accomplished outside, which is really going to blow any kind of budget for me.
I’m to the point of wanting the car to be given the help it deserves. It has been in our family since 1979 and came originally from Peru. The gages are metric and it even has the old Lima rubber co. Tires! The steel isn’t too bad on the body. Fenders are glass. Original motor ran before it was pulled. Extra front and rear axles. Interior is good and newer Upholstry on seats. Car is titled, also. I’m wanting to see if there’s any interest out there. PM with your ideas to buy everything or possibly a trade deal for something of similar value. I would consider something that needs powertrain work but the body is good. I will not separate the parts. I’ll post pictures |
06-21-2020, 08:23 AM | #2 |
Junior Member
Join Date: Mar 2018
Location: Wisconsin
Posts: 5
|
Re: 1934 Victoria project
Bump to top.
|
Sponsored Links (Register now to hide all advertisements) |
|
07-22-2020, 09:47 PM | #3 |
Junior Member
Join Date: Mar 2018
Location: Wisconsin
Posts: 5
|
Re: 1934 Victoria project
Back on wheels, rolling chassis.
|
07-23-2020, 04:32 AM | #4 |
Junior Member
Join Date: Mar 2018
Location: Wisconsin
Posts: 5
|
Re: 1934 Victoria project
Rolling on old frame.
|
09-21-2020, 09:20 PM | #5 |
Junior Member
Join Date: Mar 2018
Location: Wisconsin
Posts: 5
|
Re: 1934 Victoria project
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|