|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-24-2020, 04:42 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 961
|
'36 FORD Driver's Side Front Fender
City:
greeley
State:
Colorado
Price:
$180
For sale is a driver's side front fender for '36 cars. This is a fender I've had around for several years thinking I would eventually use it on a future project. Well, my health has gone downhill recently, and I don't think I would ever get around to using it, so I might as well let it go. This one was an interesting case. I think it sat outside upside down with water/dirt lying in it along the center ridge. When I got it blasted, it had some deep pitting in that area, so I cut that area out and replaced it with good solid metal. It has a nice outer lip, which is usually the worst area on most of these fenders. I also replaced the area that bolts up under the cowl with good solid clean metal, which is another area typically rusted badly. So it's ready for grinding and finishing before priming. You will be getting a fender that is all good solid metal. Check out the attached pictures. I put a lot of work into this one and I'd like to see it be put to good use. Price is $180 plus the shipping. If you would like any other pictures, just let me know. Questions: PM me or email me at [email protected]
|
02-29-2020, 05:00 PM | #2 |
Senior Member
Join Date: May 2010
Posts: 961
|
Re: '36 FORD Driver's Side Front Fender
Bttt
|
Sponsored Links (Register now to hide all advertisements) |
|
03-15-2020, 12:51 PM | #3 |
Senior Member
Join Date: May 2010
Posts: 961
|
Re: '36 FORD Driver's Side Front Fender
Bttt
|
05-24-2020, 03:04 PM | #4 |
Senior Member
Join Date: May 2010
Posts: 961
|
Re: '36 FORD Driver's Side Front Fender
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|