Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-18-2020, 12:32 PM   #1
Dennisfly
Senior Member
 
Dennisfly's Avatar
 
Join Date: Oct 2019
Location: Virginia
Posts: 140
Default Steering Column Bracket

I have the standard steering column gas tank bracket on my 1929 Fordor Town Sedan. I want to replace it with the 1931 style that mounts on the dash rim to lessen the chance of a fuel tank leak. None of the suppliers stock them anymore but a local club member was nice enough to give me one.

I looked at Tom Endy's pictures and instructions and it looked pretty straight forward. The problem is his pictures (the first and second ones) shows access to the back side (upper) of the dash rim to place a nut on the bolts of the adapter piece. My picture (the third one) shows no room to do this. I removed the dash wind deflector and the windshield molding but still no access.

Anyone know how to get around this?
Attached Images
File Type: jpg attachment 1.jpg (31.1 KB, 157 views)
File Type: jpg attachment.jpg (31.4 KB, 186 views)
File Type: jpg getPart.jpg (34.5 KB, 168 views)
__________________
1929 Town Sedan (Briggs) 155B, Mitchell Overdrive
1935 Model 48 Tudor
Dennisfly is offline   Reply With Quote
Old 01-18-2020, 12:42 PM   #2
Dennisfly
Senior Member
 
Dennisfly's Avatar
 
Join Date: Oct 2019
Location: Virginia
Posts: 140
Default Re: Steering Column Bracket

I did some looking and may have answered my own question.


1/4" U nut at Home Depot $.75
Attached Images
File Type: jpg metallics-everbilt-composite-fasteners-800078-64_1000.jpg (22.5 KB, 13 views)
__________________
1929 Town Sedan (Briggs) 155B, Mitchell Overdrive
1935 Model 48 Tudor
Dennisfly is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 01-18-2020, 05:22 PM   #3
David R.
Senior Member
 
Join Date: Aug 2016
Location: West Virginia
Posts: 430
Default Re: Steering Column Bracket

Why does no one have these anymore? I have been looking for one also. I would like to find an old original off the gas tank and I would make one, welded up.
David R. is offline   Reply With Quote
Old 01-18-2020, 05:48 PM   #4
Steve Plucker
BANNED
 
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
Default Re: Steering Column Bracket

Quote:
Originally Posted by David R. View Post
Why does no one have these anymore? I have been looking for one also. I would like to find an old original off the gas tank and I would make one, welded up.
Go to VFF for your answers.

Pluck
Steve Plucker is offline   Reply With Quote
Old 01-18-2020, 06:11 PM   #5
Synchro909
Senior Member
 
Synchro909's Avatar
 
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,472
Default Re: Steering Column Bracket

Here's an opening for some enterprising fellow. If you can lay your hands on one, make a pattern and cast them yourself. No Model As were imported here in 1931 so we didn't see that bracket. Any that might be about now are going to be from an imported car. No one ever reproduced these brackets for a RHD car as far as I can see so when the tank started to leak on my car, I bought a LHD one to see what they were like and cut it up as the basis of a pattern for a RHD version. I cast them in aluminium and heat treat them for '28 and 9 cars and it takes only a minor alteration to make one fit the later cars. There are not all that many 1930 cars here either by comparison to the early ones.
Maybe you could do similar - maybe a club project?
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood.
Synchro909 is offline   Reply With Quote
Old 01-18-2020, 06:14 PM   #6
Tom Endy
Senior Member
 
Tom Endy's Avatar
 
Join Date: May 2010
Location: Southern California
Posts: 3,122
Default Re: Steering Column Bracket

Sponsored Links (Register now to hide all advertisements)
The attached article may be of help. If you are installing a bracket that attches to the dash rail on a 30-31 car it will bolt right up. If you are installing it on a 28-29 car you have to make an adapter bracket.

Tom Endy

http://www.santaanitaas.org/wp-conte...lumn-Mount.pdf
Tom Endy is offline   Reply With Quote
Old 01-18-2020, 07:38 PM   #7
Dennisfly
Senior Member
 
Dennisfly's Avatar
 
Join Date: Oct 2019
Location: Virginia
Posts: 140
Default Re: Steering Column Bracket

Thanks Tom. I'm prepared to make the adapter. It's the ability to get the nuts behind the panel for the attaching bolts that concern me. Hopefully the "U" nuts will facilitate that.
__________________
1929 Town Sedan (Briggs) 155B, Mitchell Overdrive
1935 Model 48 Tudor
Dennisfly is offline   Reply With Quote
Old 01-18-2020, 08:36 PM   #8
The Master Cylinder
Senior Member
 
The Master Cylinder's Avatar
 
Join Date: Aug 2012
Posts: 875
Default Re: Steering Column Bracket

Quote:
Originally Posted by Dennisfly View Post
I have the standard steering column gas tank bracket on my 1929 Fordor Town Sedan. I want to replace it with the 1931 style that mounts on the dash rim to lessen the chance of a fuel tank leak. None of the suppliers stock them anymore but a local club member was nice enough to give me one.
Am I missing something. Snyder's still lists The steering column bracket.

https://www.snydersantiqueauto.com/P...earchByKeyword
__________________
The Master Cylinder

Enjoying life at the beach in SoCal...
The Master Cylinder is offline   Reply With Quote
Old 01-18-2020, 09:27 PM   #9
Benson
Senior Member
 
Join Date: May 2010
Posts: 2,579
Default Re: Steering Column Bracket

holes in the bar.

Last edited by Benson; 01-19-2020 at 11:56 AM.
Benson is offline   Reply With Quote
Old 01-18-2020, 09:33 PM   #10
David R.
Senior Member
 
Join Date: Aug 2016
Location: West Virginia
Posts: 430
Default Re: Steering Column Bracket

They all list them, but when you order they say they are out of stock.
David R. is offline   Reply With Quote
Old 01-18-2020, 09:37 PM   #11
David R.
Senior Member
 
Join Date: Aug 2016
Location: West Virginia
Posts: 430
Default Re: Steering Column Bracket

Excuse my ignorance: what is VFF?
David R. is offline   Reply With Quote
Old 01-18-2020, 10:51 PM   #12
Steve Plucker
BANNED
 
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
Default Re: Steering Column Bracket

Quote:
Originally Posted by David R. View Post
Excuse my ignorance: what is VFF?
Sent you a PM (Personal Message)
Steve Plucker is offline   Reply With Quote
Old 01-19-2020, 01:21 AM   #13
The Master Cylinder
Senior Member
 
The Master Cylinder's Avatar
 
Join Date: Aug 2012
Posts: 875
Default Re: Steering Column Bracket

Quote:
Originally Posted by David R. View Post
They all list them, but when you order they say they are out of stock.
Ah, I see. I see them on ebay quite often. https://www.ebay.com/itm/MODEL-A-FOR...IAAOSwc7teHlMF

Bert's more than likely has some used ones also.
__________________
The Master Cylinder

Enjoying life at the beach in SoCal...
The Master Cylinder is offline   Reply With Quote
Old 01-19-2020, 11:30 AM   #14
klawockvet
Senior Member
 
klawockvet's Avatar
 
Join Date: May 2012
Location: Klawock, AK/Kanab, UT
Posts: 301
Default Re: Steering Column Bracket

I did not like the looks of a 31 column drop on my 28. I took a 1/4 x 2" flat bar and ran it from flange to flange on the cowl. It is bolted to the cowl on each side as well a single bolt into the instrument tunnel. I used a 36 column drop with the key an toggle as mine is a hot rod but this same thing can be used with an additional functional column drop supporting the column independent of the stock drop.
klawockvet is offline   Reply With Quote
Old 01-19-2020, 12:22 PM   #15
quickchange
Senior Member
 
quickchange's Avatar
 
Join Date: May 2010
Location: Nelson. New Zealand
Posts: 1,999
Default Re: Steering Column Bracket

We produce the new right hand drive ones, also have the odd original LHD one , see them on flea bay & at usa swap meets , [email protected] Have a couple spare RHD 2 tooth steering boxes available too, Derek from a hot dry New Zealand,
quickchange is offline   Reply With Quote
Old 02-07-2020, 11:45 AM   #16
Dennisfly
Senior Member
 
Dennisfly's Avatar
 
Join Date: Oct 2019
Location: Virginia
Posts: 140
Default Re: Steering Column Bracket

1/4-20 Panel Range .064"-.125" Center 9/16" U Type Nut from Fastenal fixed the problem. The spring/U nuts from Lowes/Homedepot/local hardware store were not deep enough. My car was different from other 28/29s in our local club. Tudor Sedan, and Coupe had room to use a normal nut.
__________________
1929 Town Sedan (Briggs) 155B, Mitchell Overdrive
1935 Model 48 Tudor
Dennisfly is offline   Reply With Quote
Old 02-07-2020, 11:49 AM   #17
ryanheacox
Senior Member
 
ryanheacox's Avatar
 
Join Date: Apr 2013
Location: Northwest CT
Posts: 1,092
Default Re: Steering Column Bracket

That makes sense since the Fordors used a different cowl.
ryanheacox is offline   Reply With Quote
Old 02-07-2020, 04:22 PM   #18
PalAl
Senior Member
 
PalAl's Avatar
 
Join Date: Jul 2016
Location: Orangeville Illinois
Posts: 461
Default Re: Steering Column Bracket

Quote:
Originally Posted by Dennisfly View Post
1/4-20 Panel Range .064"-.125" Center 9/16" U Type Nut from Fastenal fixed the problem. The spring/U nuts from Lowes/Homedepot/local hardware store were not deep enough. My car was different from other 28/29s in our local club. Tudor Sedan, and Coupe had room to use a normal nut.
Did you happen to take pictures of what you did? I have a 29 Fordor Briggs and was stumped as to changing the support. Put it off for a later date. Would like some info on how you did the new support if you would like to share. Thanks
PalAl is offline   Reply With Quote
Old 02-08-2020, 10:04 AM   #19
Dennisfly
Senior Member
 
Dennisfly's Avatar
 
Join Date: Oct 2019
Location: Virginia
Posts: 140
Default Re: Steering Column Bracket

I bought a piece of Aluminum 3/8 X 1 X 8 on Ebay. I used a grinder and file to shape the top to the contour of the tank/panel where it would be attached. I carefully measured and drilled four holes to accommodate 1/4 inch machine screws. Two to attach this piece with screws going up into the panel and two to attach the bracket with screws going down. The holes were countersunk and flat head screws used. I'll see if I can take a picture or two. The link in post #6 actually has great pictures and description by Tom Endy. The only difference with mine is the use of the Fastenal U nuts due to the restricted access.


Last picture shows old mount with column placed so it doesn't touch the tank area.
Attached Images
File Type: jpg IMG_0378.JPG (120.8 KB, 92 views)
File Type: jpg IMG_0379.JPG (112.1 KB, 84 views)
File Type: jpg IMG_0382.JPG (111.5 KB, 81 views)
__________________
1929 Town Sedan (Briggs) 155B, Mitchell Overdrive
1935 Model 48 Tudor

Last edited by Dennisfly; 02-08-2020 at 12:29 PM. Reason: Add Pictures
Dennisfly is offline   Reply With Quote
Old 02-08-2020, 11:17 PM   #20
PalAl
Senior Member
 
PalAl's Avatar
 
Join Date: Jul 2016
Location: Orangeville Illinois
Posts: 461
Default Re: Steering Column Bracket

Quote:
Originally Posted by Dennisfly View Post
I bought a piece of Aluminum 3/8 X 1 X 8 on Ebay. I used a grinder and file to shape the top to the contour of the tank/panel where it would be attached. I carefully measured and drilled four holes to accommodate 1/4 inch machine screws. Two to attach this piece with screws going up into the panel and two to attach the bracket with screws going down. The holes were countersunk and flat head screws used. I'll see if I can take a picture or two. The link in post #6 actually has great pictures and description by Tom Endy. The only difference with mine is the use of the Fastenal U nuts due to the restricted access.


Last picture shows old mount with column placed so it doesn't touch the tank area.

Thank you I didn't understand the placement of the U nut....
This old guy gets it, easy. Much better then hanging on the tank
PalAl is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:46 AM.