The Ford Barn

J Man · 10-22-2010, 08:04 PM

Where is the best place to get the best quality and American made reproduction T fenders? thanks

Roadster62 · 10-22-2010, 08:22 PM

Rootleib makes the best, and most parts suppliers are vendors of his fenders and hoods. Good stuff I've used his products for years.

CCWKen · 10-22-2010, 10:47 PM

Make sure to remove any hinge limiters on your wallet. It will need to open pretty wide.

J Man · 10-23-2010, 07:42 PM

What I am wanting to do is Make a TT into a T. I want it to look like something that could have been built (as far as I know Ford never built a closed cab T truck).

I have the cab, hood and rad shell off the TT and a bed from a T rpu ('26/'27). I want to run '27 style fenders. Fronts I saw but I did not see RPU specific rear fenders, splash aprons or running boards, Are these model specific or are these parts shared with another style body? Thanks

Jack Innes · 10-24-2010, 12:16 PM

('26/'27). I want to run '27 style fenders. Fronts I saw but I did not see RPU specific rear fenders, splash aprons or running boards, Are these model specific or are these parts shared with another style body? Thanks[/QUOTE]

26/27 T roadster, coupe & pickup share the same rear fenders, running boards & splash apropns are the same on all models.
If you are going to use these on a TT you might want to check to see if there is room for the larger tires - both diameter & overall width.

J Man · 10-25-2010, 11:30 AM

Sponsored Links (Register now to hide all advertisements)

http://carnut.com/cgi-bin/03/image.p...pf/nat1745.jpg

This is what I am going for but more stock looking and using a stock T bed.

10-22-2010, 08:04 PM	#1
J Man Member Join Date: May 2010 Location: Sherwood, OH Posts: 49	Model T fenders Where is the best place to get the best quality and American made reproduction T fenders? thanks

10-22-2010, 08:22 PM	#2
Roadster62 Senior Member Join Date: May 2010 Location: Ridgefield, Ct Posts: 3,441	Re: Model T fenders Rootleib makes the best, and most parts suppliers are vendors of his fenders and hoods. Good stuff I've used his products for years.

10-22-2010, 10:47 PM	#3
CCWKen Member Join Date: May 2010 Location: South Texas Posts: 97	Re: Model T fenders Make sure to remove any hinge limiters on your wallet. It will need to open pretty wide.

10-23-2010, 07:42 PM	#4
J Man Member Join Date: May 2010 Location: Sherwood, OH Posts: 49	Re: Model T fenders What I am wanting to do is Make a TT into a T. I want it to look like something that could have been built (as far as I know Ford never built a closed cab T truck). I have the cab, hood and rad shell off the TT and a bed from a T rpu ('26/'27). I want to run '27 style fenders. Fronts I saw but I did not see RPU specific rear fenders, splash aprons or running boards, Are these model specific or are these parts shared with another style body? Thanks

10-24-2010, 12:16 PM	#5
Jack Innes Senior Member Join Date: May 2010 Location: Brooklin, Ontario Posts: 704	Re: Model T fenders ('26/'27). I want to run '27 style fenders. Fronts I saw but I did not see RPU specific rear fenders, splash aprons or running boards, Are these model specific or are these parts shared with another style body? Thanks[/QUOTE] 26/27 T roadster, coupe & pickup share the same rear fenders, running boards & splash apropns are the same on all models. If you are going to use these on a TT you might want to check to see if there is room for the larger tires - both diameter & overall width.

10-25-2010, 11:30 AM	#6
J Man Member Join Date: May 2010 Location: Sherwood, OH Posts: 49	Re: Model T fenders Sponsored Links (Register now to hide all advertisements) http://carnut.com/cgi-bin/03/image.p...pf/nat1745.jpg This is what I am going for but more stock looking and using a stock T bed.