The Ford Barn

Vics Stuff · 09-30-2018, 05:03 PM

Hey Guys ! I am looking for a patch panel for my passenger side fire wall. The previous owner cut a battery box hole in the otherwise nice firewall. all 33 - 36 ford cars and trucks have the same area needed for my project. This will increase my options .
Also looking for a outside header above the windshield panel. All the 33 - 34 take the same part. Mine looks like someone hauled something on the roof and tried to repair it , not a good job.
Thanks Vic

Vics Stuff · 10-11-2018, 12:31 AM

bump

Vics Stuff · 10-20-2018, 11:40 PM

Had some leads but none panned out.

Vics Stuff · 10-28-2018, 01:14 AM

Did some research and found that the section of firewall needed for my 33 is the same for all 33 -36 ford cars and trucks. This will open up more options.
Any leads also appreciated.
Vic

Vics Stuff · 11-04-2018, 11:16 PM

Getting closer but no cigar

Vics Stuff · 12-30-2018, 03:41 AM

Sponsored Links (Register now to hide all advertisements)

Bump back to the top. Still looking.
Any help is appreciated

Vics Stuff · 01-18-2019, 04:54 PM

Still on the hunt. Have located some parts but those were worse than what I have .
Vic

Vics Stuff · 01-28-2019, 02:09 AM

Still looking , found a lot parts but all are worse that what I have .
Thanks for this site
Vic

09-30-2018, 05:03 PM	#1
Vics Stuff Senior Member Join Date: Jun 2013 Location: Reno Nevada Posts: 391	1933 -34 Ford sheet metal City: Anchorage State: ALASKA Hey Guys ! I am looking for a patch panel for my passenger side fire wall. The previous owner cut a battery box hole in the otherwise nice firewall. all 33 - 36 ford cars and trucks have the same area needed for my project. This will increase my options . Also looking for a outside header above the windshield panel. All the 33 - 34 take the same part. Mine looks like someone hauled something on the roof and tried to repair it , not a good job. Thanks Vic Last edited by Vics Stuff; 10-28-2018 at 01:16 AM.

10-11-2018, 12:31 AM	#2
Vics Stuff Senior Member Join Date: Jun 2013 Location: Reno Nevada Posts: 391	Re: 1933 -34 Ford sheet metal bump

10-20-2018, 11:40 PM	#3
Vics Stuff Senior Member Join Date: Jun 2013 Location: Reno Nevada Posts: 391	Re: 1933 -34 Ford sheet metal Had some leads but none panned out.

10-28-2018, 01:14 AM	#4
Vics Stuff Senior Member Join Date: Jun 2013 Location: Reno Nevada Posts: 391	Re: 1933 -34 Ford sheet metal Did some research and found that the section of firewall needed for my 33 is the same for all 33 -36 ford cars and trucks. This will open up more options. Any leads also appreciated. Vic

11-04-2018, 11:16 PM	#5
Vics Stuff Senior Member Join Date: Jun 2013 Location: Reno Nevada Posts: 391	Re: 1933 -34 Ford sheet metal Getting closer but no cigar

12-30-2018, 03:41 AM	#6
Vics Stuff Senior Member Join Date: Jun 2013 Location: Reno Nevada Posts: 391	Re: 1933 -34 Ford sheet metal Sponsored Links (Register now to hide all advertisements) Bump back to the top. Still looking. Any help is appreciated

01-18-2019, 04:54 PM	#7
Vics Stuff Senior Member Join Date: Jun 2013 Location: Reno Nevada Posts: 391	Re: 1933 -34 Ford sheet metal Still on the hunt. Have located some parts but those were worse than what I have . Vic

01-28-2019, 02:09 AM	#8
Vics Stuff Senior Member Join Date: Jun 2013 Location: Reno Nevada Posts: 391	Re: 1933 -34 Ford sheet metal Still looking , found a lot parts but all are worse that what I have . Thanks for this site Vic