|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-22-2013, 05:28 PM | #1 |
Senior Member
Join Date: May 2010
Location: Ashland KY
Posts: 1,159
|
Dist machine calibration
Some of you guys that have Dist machines ( sun ) ( Allen) ect, how do you check the dwell calibration of your machine, Any way to use a sig generator or a calibrated voltage? Thanks
__________________
DON P |
10-23-2013, 12:27 PM | #2 |
Junior Member
Join Date: May 2010
Location: Lake Havasu City, AZ
Posts: 13
|
Re: Dist machine calibration
I checked mine (Sun MD-1) against a hand held dwell / tach meter throughout the rpm range. I was lucky, same reading.
|
Sponsored Links (Register now to hide all advertisements) |
|
10-24-2013, 06:57 AM | #3 |
Senior Member
Join Date: May 2010
Location: Proctorville
Posts: 1,582
|
Re: Dist machine calibration
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|