|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-01-2013, 12:32 PM | #1 |
Junior Member
Join Date: Aug 2010
Location: North Carolina
Posts: 14
|
Howard's Cams Specs Needed M-6 & M-14
Looking for the specs on these two cam M-6 & M-14.
I imagine the M-6 is barely better than a stock cam when the M-8 is 0.328 lift and 230 Adv. Duration. Also would like the know the duration at 0.050 duration for both cams, if anyone has that info also. Thanks, Roger |
11-01-2013, 12:49 PM | #2 |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,142
|
Re: Howard's Cams Specs Needed M-6 & M-14
Roger:
They are still in business. If you Google Howard's Cams, you find their contact info. Not sure if they still have FH specs on file, but I'd start with the source first. |
Sponsored Links (Register now to hide all advertisements) |
|
11-01-2013, 06:27 PM | #3 |
Member
Join Date: May 2010
Posts: 73
|
Re: Howard's Cams Specs Needed M-6 & M-14
M14 spec Intake duration = 288 , Exhaust Duration = 286 65 degree overlap and .372 Lift Exhaust opens 77 BBDC closes 29 ATDC Intakr opens 36 BTDC and closes 72 ABDC checking clearance .015 36fordguy PS I have it running in my street car nice drivein cam plenty lopy . Came from fuel dragster in the old days very hard to tune for every day driving.
|
11-02-2013, 01:53 AM | #4 | |
Senior Member
Join Date: May 2010
Location: Germany
Posts: 249
|
Re: Howard's Cams Specs Needed M-6 & M-14
Sponsored Links (Register now to hide all advertisements)
Quote:
|
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|