|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-06-2016, 02:58 PM | #21 | |
Senior Member
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
|
Re: Henry's fist car
Quote:
Thats the round about way part. They were suppliers of/to Ford as well as 10% stock holders and brother John was at one early time vice president of Ford stepping down from that position in the early teens. [ 1912 or 13 if I remember correctly]. The profits from their Ford stock allowed them to start their own car company, again, if I remember correctly. But, I can't remember what I had for breakfast. |
|
04-06-2016, 04:04 PM | #22 |
Senior Member
Join Date: May 2010
Location: Northport, NY
Posts: 1,597
|
Re: Henry's fist car
This is from WIKI While it is not germaine to the original FIST CAR, it offers something about the Cadillac Automobile Company origins.
Cadillac was formed from the remnants of the Henry Ford Company. After a dispute between Henry Ford and his investors, Ford left the company along with several of his key partners in March 1902. Ford's financial backers William Murphy and Lemuel Bowen called in engineer Henry M. Leland of Leland & Faulconer Manufacturing Company to appraise the plant and equipment in preparation for liquidating the company's assets. Instead, Leland persuaded the pair to continue manufacturing automobiles using Leland's proven single-cylinder engine. A new company called the Cadillac Automobile Company was established on 22 August 1902. It was named after French explorer Antoine Laumet de La Mothe, sieur de Cadillac, who founded Detroit in 1701.[6][7] AND FROM WIKI ON THE DODGE BROTHERS & HENRY On February 23, 1903 the Dodge brothers formally agreed to supply Henry Ford with 650 chassis (including engines, transmissions, and axles) for $250 each, thus beginning a profitable, but stormy relationship between the two firms. This contract kept the 150 men at the Hastings Street plant fully occupied and the Dodges began working exclusively for Ford. He built a plant on Mack Avenue to assemble cars from parts made elsewhere, the entire operation dependent upon extensive credit from his parts suppliers. In return for an investment of $10,000 ($7,000 in materials and a $3,000 bank note), the Dodge brothers accepted 100 shares (one-tenth of the total) in the Ford Motor Company., newly-incorporated on June 16, 1903. Dodge delivered the first shipment of chassis to Mack Avenue in July via horse-drawn hayracks and the Ford Motor Company assembled its first cars. During these early years. Ford often complained that the Dodge workers turned out shoddy products because they were paid by the piece. Despite these problems, he ordered another 755 engines for delivery in January through May 1904, and insisted on the right to order 500 more by early April. By the spring of 1905, when Ford had moved into his new Piquette Avenue plant. Dodge Brothers supplied 400 "rigs" (engines and transmissions) a month. Dodge continued as the major supplier, but by late 1905 Ford was already taking steps to produce his own engines and transmissions for the low-priced Model N. The fates of Ford and the Dodges remained intertwined for fifteen years. The Dodge brothers began erecting a new plant on their thirty acre site in Hamtramck in 1910, the same year Ford opened his Highland Park complex. In 1912 they supplied Ford with 180,000 transmission-axle sets, with future prospects for much larger orders First automobiles |
Sponsored Links (Register now to hide all advertisements) |
|
04-06-2016, 06:35 PM | #23 | |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Henry's fist car
Quote:
I'd still say #3 is correct with Henry building the quadricycle in 1896. I seem to recall it was later sold to a doctor, but years later was bought back again for the museum. |
|
04-07-2016, 07:08 AM | #24 |
Senior Member
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
|
Re: Henry's fist car
|
04-07-2016, 08:38 AM | #25 |
Senior Member
Join Date: Mar 2011
Location: Riverview, Michigan
Posts: 127
|
Re: Henry's fist car
Here is a pic of the question. I didn't argue with the teacher about it. I work with about 3/4 of the class, they tease me because I keep bringing it up. They google it and show me 1908 for the "T" they don't care that it's wrong. I couldn't put 1908 because I knew it was wrong. I put 1903 because FoMoCo was establish that year. I have at least 2 more classes with this teacher I hate to rock the boat this early. But I still might.
Pic won't load from my phone I'll try later |
04-07-2016, 10:47 AM | #26 |
Senior Member
Join Date: Mar 2011
Location: Riverview, Michigan
Posts: 127
|
Re: Henry's fist car
Sponsored Links (Register now to hide all advertisements)
|
04-07-2016, 12:31 PM | #27 |
Senior Member
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
|
Re: Henry's fist car
I think there would a couple diplomatic ways to present a printing of several links with the correct answer at the correct and most opportune time.
I know some folks get mad no matter how gently they are told certain things, but, I think most enjoy learning something new. |
04-07-2016, 01:58 PM | #28 |
Senior Member
Join Date: Jul 2010
Location: Livonia, MI
Posts: 197
|
Re: Henry's fist car
While Detroit had the first mile of concrete pavement, I thought Bellefontaine Ohio claims they were the first concrete road in the US (1893).
|
04-07-2016, 04:27 PM | #29 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,509
|
Re: Henry's fist car
I like the grammar where he uses the word 'weather' in place of whether! |
04-07-2016, 04:39 PM | #30 |
Senior Member
Join Date: May 2010
Location: Northport, NY
Posts: 1,597
|
Re: Henry's fist car
Just to pile on the poor teacher, the LONG ISLAND MOTOR PARKWAY had ten miles of Reinforced concrete completed and VANDERBILT CUP RACES on it by October 1908. These cars were averaging over 90 MPH in 1908 on a 225 mile race course.
WIKI FOLLOWS William Kissam Vanderbilt II, the great-grandson of Cornelius Vanderbilt, was an auto-racing enthusiast and created the Vanderbilt Cup, the first major road racing competition, in 1904. He ran the races on local roads in Nassau County during the first decade of the 20th century, but the deaths of two spectators and injury to many others showed the need to eliminate racing on residential streets. Vanderbilt responded by floating a company to build a graded, banked and grade-separated highway suitable for racing that was also free of the dust churned up by horses. The resulting Long Island Motor Parkway, with its banked turns, guard rails, reinforced concrete tarmac, and controlled access, was the first limited-access roadway in the world.[3] William K. Vanderbilt II The road was originally planned to stretch for 70 miles (110 km) in and out of New York City as far as Riverhead, the county seat of Suffolk County, and point of division for the north and south forks of Long Island. Only 45 miles (72 km) (from Queens in New York City to Lake Ronkonkoma) were constructed, at a cost of $6 million.[3] Construction began in June 1908 (a year after the Bronx River Parkway). On October 10, 1908,[4] a 10-mile-long (16 km) section opened as far as modern Bethpage, making it the first superhighway. It hosted races in 1908 and on the full road in 1909 and 1910, but an accident in the latter year's Vanderbilt Cup, killing two riding mechanics with additional injuries,[5] caused the New York Legislature to ban racing except on race tracks, ending its career as a racing road. By 1911, the road was extended to Lake Ronkonkoma. It was the first roadway designed exclusively for automobile use, the first concrete highway in the United States, and the first to use overpasses and bridges to eliminate intersections.[6] Access |
04-07-2016, 10:46 PM | #31 |
Senior Member
Join Date: May 2010
Posts: 1,643
|
Re: Henry's first car
"In what year did Henry Ford build his first car in Detroit?"
From www.history.com At approximately 4:00 a.m. on June 4, 1896, in the shed behind his home on Bagley Avenue in Detroit, Henry Ford unveils the “Quadricycle,” the first automobile he ever designed or drove. From the Henry Ford Organization Webpage: www.thehenryford.com - |
04-08-2016, 06:51 AM | #32 |
Senior Member
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
|
Re: Henry's fist car
John Dodge:
o retool their plant to build engines for Henry Ford in a deal that included a share position in the new Ford Motor Company. By 1910, John Dodge and his brother were so successful they built a new plant in Hamtramck, Michigan.[2] For ten years (1903–1913), the Dodge brothers' business was a Ford Motor Company supplier, and Dodge worked as vice president of the Ford company.[3] He left Ford in 1913, and in 1914 he and Horace formed Dodge Brothers to develop their own line of automobiles. They began building motor trucks for the United States military during the arms buildup for World War I, and in October 1917 they produced their first commercial car. At war's end, their company produced and marketed both cars and trucks. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|