Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-09-2012, 10:11 PM   #1
David Lien
Member
 
Join Date: May 2010
Location: Pocateelo Idaho
Posts: 33
Question Oil Preasure Without fuel pump Rod

Help: I'am looking to buy a 59 AB engine that was rebuilt and run a couple of thousand miles with a an electric fuel pump. They left the manual fuel pump rod out. They said it had some oil preasure, and run just fine. My question to this board is would this motor still have enough oil preasure being run without the manul pump rod to prevent harm.???? thanks David
David Lien is offline   Reply With Quote
Old 01-09-2012, 10:17 PM   #2
4tford
Senior Member
 
4tford's Avatar
 
Join Date: May 2010
Location: Regina Canada
Posts: 1,334
Default Re: Oil Preasure Without fuel pump Rod

Should be no problem
4tford is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 01-09-2012, 10:28 PM   #3
Russ/40
Senior Member
 
Russ/40's Avatar
 
Join Date: May 2010
Location: Santee, California
Posts: 3,505
Default Re: Oil Preasure Without fuel pump Rod

It's probably fine. I would not put much value in the "rebuilt" claim, unless you can hear it run and do a compression check on it. Rebuilt means different things to different people. What is he asking for it?
Russ/40 is offline   Reply With Quote
Old 01-09-2012, 11:41 PM   #4
Andy
Senior Member
 
Join Date: May 2010
Location: Kerrville, Tx
Posts: 2,768
Default Re: Oil Preasure Without fuel pump Rod

There is NO pressure lube to the rear cam bearing. There is no pressure there to lose. It has no effect on oil pressure if the rod is there or not.
Andy is offline   Reply With Quote
Old 01-10-2012, 12:45 AM   #5
David Lien
Member
 
Join Date: May 2010
Location: Pocateelo Idaho
Posts: 33
Default Re: Oil Preasure Without fuel pump Rod

Thank you for your comments and knowledge. The motor is undervalued and has not run for a dozen years. David
David Lien is offline   Reply With Quote
Old 01-10-2012, 02:24 AM   #6
41 Fords ohio
Senior Member
 
41 Fords ohio's Avatar
 
Join Date: Nov 2011
Location: Salt Lake City,Utah
Posts: 141
Default Re: Oil Preasure Without fuel pump Rod

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Russ/40 View Post
It's probably fine. I would not put much value in the "rebuilt" claim, unless you can hear it run and do a compression check on it. Rebuilt means different things to different people. What is he asking for it?
Great advice. Also if it hasn't been run in that many years,I would go through it before you do all the work of installing it. Just my opinion.
__________________
When will I be old enough to know better?
41 Fords ohio is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:25 AM.