Tillison and Marvil carb

[chiliman]

Does any one have float setting for tillison and marvel carbs thanks Richard

[Gary WA]

Site Index (Model-A.org)

[Gary WA]

JIMS MODEL A CARBS – PROFESSIONALLY REBUILT CARBURETORS, 100% TESTED ON REAL MODEL A ENGINE! SOLD AND SHIPPED WORLDWIDE!

[Gary WA]

Depends on type!

[Herb Concord Ca]

For the Tilly, use 1". with upper half turned up side down, measure from gasket surface to top of float.
for Marvel, 15/16" with upper half turn up side down, measure from gasket surface to float seam, and the seam should be level to the gasket surface.
Hope this helps.

[chiliman]

Sponsored Links (Register now to hide all advertisements)

Thanks